Questions & Answers for: platen copy

...copy? I start by cleaning the platen glass. Wipe the Platen Glass with a clean, soft, lint-free cloth moistened with water. Then wipe with a clean, soft, dry, lint-free cloth making sure not to leave ...

...platen glass. < 1 > Alignment Mark Close the document cover gently. Confirm that the printer is in Copy mode. If the printer is not in Copy mode, press the button to switch into Copy mode. Check the ...

Copy glass ( Platen Glass) this is where you lift the top to put it onto the glass to make a copy. Never heard of this message , was it serviced? usually the techs open it to clean the Optics (mirrors

copy in the dockfeeder,and one copy on the platen glass.If you only have a line on the one copy make by the dockfeeder,the small glass next to the platen glass is dirty.Clean with spirits. Let me know

...copy. No problem when using the platen. I have cleaned the glass with little success. Have you cleaned the small, narrow glass window leftmost of the platen? It is directly above the scanning bar's ...

when i make copies from the platen glass the first copy is ok the second the scanner moves opposite direction and from ADF is oknj the solution for the platen glass Chang & senser

...IS THE PLATEN GLASS AND HOW TO CLEAN IT? Hi, the platen glass is small glass on the left side of normal copy glass. The platen copy glass is used when you making the copies from ADF. Hope that ...

Paper goes into machine before copier platen moves which results in only copying 1/2 of material. How do I retime the platen movement so that I get a full copy? Check the paper sincron cloutch.

...copy then large vertical white line is coming in the side.please help. Him are you using the upper feeder or platen glass? . If copies are ok in platen glass . There is dirty in the feeder reading ...

MY SHARP MODEL mx-m314nv copier is becoming misty inside the platen glass until you can not make clear copies unless you wipe the optics and the under side of the platen glasS why does a copier become