Questions & Answers for: pentair remote working

...Pentair MiniMax NT pool heater (300k btu)will not ignite. The temperature control assembly Power light and Pressure SW light are on. The digital display and other lights (off/spa/pool/remote) do not ...

Pentair Easy Touch 8: Im getting a communication timeout on the remote when I send a command. It used to work fine (for 3 years) and now the error keeps coming up unless I'm standing next to the panel

Pentair Easy Touch remote lost sync with the outside unit. Have tried resyncing a dozen times, per the manual, tried hitting the reset button and then resyncing...nothing worked. I removed the cover ...

INTELLITOUCH REMOTE CONTROLLER WILL NOT COMMUNICATE WITH OUTDOOR PANEL P/N 520305 OR 520306 - THIS IS A REMOTE CONTROLLER FOR POOL PUMP, SPA, HEATER, ETC. REMOTE WILL NOT CONNECT WITH MAIN UNIT ...

...Pentair Easy Touch inside remote reads 'No Comm' even though batteries are fine. I get the same message even close up to the transmitter antenna. My pool service looked at it and noticed My ...

Pentair Thermal Flo Heat pump model HP1200 displays water temp but none of the buttons on the key pad work and the heat pump will not turn on see if on remote

...remote control as being a part of the problem, I cannot get power unless I turn on the main power switch to the spa/pool light The heater is an AquaCal Heatwave 120 however my problem is with the ...

...remote to the pentair easytouch controller? Is it possible to just hook up the Jandy 4-button spa side control to the Pentair panel? I've installed dozens of Pentair ez-touches. Call Pentair and ask ...

service manual motherboard Spa remote does not work possible bad remote water gets in to cord

...Pentair Easytouch 8 control panel. I just had to replace the motherboard in the Easytouch control panel. Everything appears to be working normally with exception of the Max E Therm 400 LP heater. I ...