Questions & Answers for: paper size tray

...Paper size and type are mismatched." The paper in Tray 1 is loaded the same way we have always loaded it, and Tray 1 was working properly yesterday. We are still able to print from Tray 2. First make ...

Paper Size Look at the chart below to verify that the paper size meets the 3000cn / 3010cn / 3100cn-series specifications. Verify the paper size in the tray matches the size set in the 3000cn / 3010cn

...Paper Size Error: The paper size selected in the "Paper Size Error: The paper size selected in the printer driver software does not match the paper size in the printer IN tray." I reloaded ...

...paper size setting. 1) Hold down the [PAPER SIZE ENTER] key for more than 5 seconds to set the selected paper size. The currently selected paper feed location indicator will blink and the ...

Paper Size Explanation The printer detected a paper size different than what it was expecting. This is typically caused if two or more sheets stick together in the printer, or if the paper tray is not

...paper size setting in the printer driver at your PC. Hold down the [PAPER SIZE ENTER] key more than 5 seconds to set the selected paper size. The currently selected paper feed location indicator will ...

size of paper. Look, when you send a job to print, if the size of your document is not the same size of the paper (tray 1), the machine will use the MU tray. This tray no have limitation of size paper

...Paper Size, Type, and Color To configure settings for Paper Trays 1 and 2 Open the paper tray. Make sure that the required paper stock is loaded in the paper tray, and that the paper edge guides are ...

...size paper (8.5" x 11"). Load the letter-size paper into Tray 1. Close Tray 1. Load Paper into Tray 2 (Legal Size): If you haven't already, install Tray 2 into the printer. Adjust the paper guides in ...

...size paper. I switched the bypass tray with another machine and the copier will still not recognize the right size paper. printer model is xerox C60 After loading the tray, make sure to select the ...