Questions & Answers for: paper feed indicates paper out

feed the paper and push the paper button. Pls help Charles Gu Printor indicator light is brinking and Paper indicator light is always on and never disappear even if I feed the paper and push the paper

...indicate a paper jam when paper doesn't feed. But if this isn't the case and a jam is indicated as soon as you turn the printer on, one of the plastic jam sensing actuators may be broken or hung

...indicating a paper jam. Prints fine if single sheet thru bypass slot. Not picking up paper indicates either a worn nip roller (rubber on feed spindle) or you have a broken gear in the feed

...paper feed and pick-up rollers with a rag dampened with just plain water will help sometimes unless the rollers are completely worn out. If all this doesn't help you may have a paper feed clutch or ...

...paper feed at back of unit (normal paper feed direction) on the side that's obstructed and look in the unit to see where the paper enters.  Then use card stock or thicker paper in reverse ...

feed the paper. Since this is a rear feed machine sometimes things can fall into the paper feed slot so I would remove the paper and look into the port where the paper goes. Also while your there look

...feed path indicates that the paper is feeding okay. Your problem can be a jammed switch (loose scrap of paper), a broken switch, a switch disconnected from the controller board or a possible bad ...

...paper feed location indicator will blink and the corresponding paper size (which is currently set) indicator will light steadily. All other indicators will go out. 2) If the machine has two paper ...

paper feed results in a clicking and no feed This sounds as if the paper pick up assembly is not lifting the paper-up to meet the rollers.  This is like a ratcheting sound when lifting.

...paper feed stops and paper jam indicated comes on. There seems to be plenty of ink. Something either stops the paper feed or will not let it continue. Thanks In some cases, not all; the paper feed ...