Questions & Answers for: oki printer printing light

OKI C5200 laser printer After sending document to print, the document shows on the printing queue, but printer won't print unless I restart the computer. This can happen serveral times a day, from all

printer does between 3 and maybe 6 labels, then stops. The alarm light flashes and the HSD and PROP lights on the front panel are lit. Print quality of the labels that do print is spotty, too. New Oki

...OKI c3200n color laser printer on power up: 1. LED display, status lights briefly flash 2. little black bars circle on LED display (no back-light). 3. error message on LED display: "COMMUNICATION ...

...Oki Microline 590. It will print then stop and the menu light comes on. Then it will start printing again. Then stop and so on. I know that the menu light blinking is saying that the print head is ...

Oki B4250 Printer Driver Run Status Monitor (utiliti that is supplied with the printer or can be downloaded from the web-site) and check what is wrong. It is likely that toner has gone low or the drum

...printer Hi oki 320 turbo printer started to print very light ,i want to change the ink ,but i do not know where to put the ink ,please help There is now ink in the machine. You just have to replace ...

...OKI MICROLINE 591 Printer was on but was not printing. Then power on printer stopped. No lights will come on and it will not print. have you checked the wall socket , try another wall socket , try ...

...printer usesblack toner cartridge printing is too faint to read on entire page. New Oki cartridge and new drum has been installed. Still printing too light to read. Try performing a stop test. Send a ...

oki mb470 pages are not printing properly print on pages is uneven. replaced the toner cartridge but the print is not normal. there are light spots in the print to the point that you cannot read it. ...

...oki microline 421 printer. Print is very light even when I put in a new ribbon. I have changed out the print head twice now in the last few months but that does not seem to help. I am using the oki ...