...net K try Resetting purge counter: 1) Enter machine maintenance mode (on MFC210C all four photo/copy/fax/scan lights flash in maintenance mode). Care is needed in maintenance mode, otherwise critical ...
...zero: Select Reset Maintenance Count from the Configuration menu. The message Reset Maint Cnt=Reset displays momentarily. When the reset operation is complete, the menu returns to the Printer Setup ...
...message? First thing, update Windows. The error occurs from Microsoft .NET Framework. Lexmark could have made their application a bit more compatible with framework, but they ...
...message from my printer that will not cancel? gene_eubank@comcast.net I'm figuring that you are referring to print jobs, rather than an error message. If an error message, please comment. If ...
Question about X6650 4-In-One Wireless InkJet Printer
...NET FRAMEWORK VERSION 2". WHAT IS THIS AND WHAT CAN I DO TO GET RID OF THE ERROR MESSAGE. Hi. That error pops up when you're using an installation cd that runs on Microsoft .Net Framework Version 2. ...
...message is "change catridge invalid refill" What should I do with this problem? or I can't fix it. did you replace the IC count chip.Its made on the front of the drum and it resets the drum back to ...
...message should be cleared only when the photoconductor kit has been replaced. If PC kit is new and still getting samemessage, please reset the photoconductor counter to zero. For further ...
...message,Printing Failure,current print job canceled,print status 15% completed,shows cartridge info.Power light blinks on-off,have reinstalled driver,rebooted windows. Widows XP It could be the Print ...
Question about S305 IMPACT LEXS All-In-One InkJet Printer
...message persists. Make sure there are no print jobs stuck in the queue. If you're using Windows, go to the Control Panel > Printers > double-click on the Lexmark print object. Delete all ...
...message. You could simply go into the configuration menu and clear the maintenance count, but likely your fuser will be getting to the point where it will start causing print defects and need to be ...
Usually answered in minutes!
3 Questions
4 Questions
3 Questions
