Questions & Answers for: meade hand controller

meade autostar hand unit fails after 2 seconds changed hand units Incorrect polarity applied to unit, then this problem. You damaged the circuits inside the hand controller-- unless you are an ...

...hand controller. Could just be a bad cable. See if you can find a new one or buy a new one from Meade. www.meade.com You can also try reversing the cable. (depends on the Meade telescope). If a new ...

...Meade lx-90 dec printed circuit board bad. where can I get a replacement. Since you already disassembled the scope-- you can send the board to Ron Sampson and he should be able to repair it. He fixes ...

hand controller, using the Meade version 5.9 updater software. You will need the proper computer cable between the computer and the hand controller to update the firmware. http://www.meade.com/support

...speed it will now slew?? Either the buttons are STICKING on your hand controller, or the hand controller cable is defective. Contact Meade customer service: ...

hand controller and reload the firmware using the proper computer cable and Autostar Updater Version 5.9 available here: http://www.meade.com/support/auto.html http://www.meade.com/support/Win7_ASU592

...Meade dealers can order you a new hand controller, either Autostar II, or the 497 controller. Contact a large telescope dealer in the UK, or you can order direct from Meade here: ...

...does your hand controller is bad-- if it does not then a more serious problem with an internal circuit board will require you to return it to Meade for repairs. ...

...left or right Fresh batteries? and you may have a bad hand controller canble; or a bad hand controller; or something broken inside the scope. Contact Meade here: ...

...hand controller and buy a new cable. If these two do not fix it then it's a mechanical problem or a circuit board problem inside the scope. Meade can repair this but you will need to send them the ...