Questions & Answers for: NEC master cd Computers & Internet

...MASTER with a DVD drive as SLAVE It started when I tried to erase an old CDRW, It gave me an error. I tried in my other computer which would not erase it as well. I gave up on this CDRW, but I can't ...

...what setting it had and replicate the same setting on the replacement CD drive. the master slave setting pins are usually next to the 40pin IDE connector on the back of the drive. hope this helps ...

...cd drive it came with.however,i tried to install a dvd/cdr combo drive in it.when i do this,windows xp hangs up and will not boot.it just stalls.what should i do?i tried several drives with the same ...

...Master Boot Record (MBR) where the boot loader resides. Most new computers are shipped with boot loaders for some version of Microsoft Windows or the Mac OS. If a computer is to be used with Linux, a ...

...slave Need the switch setting for connection of a NEC ND-1100A as slave The first selection is for "master" the second will be for slave, and the third is an automatic selection done by the ...

slave. If you are connecting this along with another drive make sure the other drive is set to (ma) master

...master I have two CD drive (NEC NR 7800A) and a DVD writer Liteon SHW-160P6S need to know how to connect the cables to make one master and other slave the First thing you need to do is make sure the ...

...CD Rom drive is an IDE drive and id on the same IDE cable as another device, make sure that both devices are strapped for cable select, Or, if one device is strapped as master, the other must e ...

...master cd but the computer components didn't match : long beep at start-up then freeze . Model name is Packard Bell iMedia 9600 windows98:windows XP . Thank you . or maybe you could guide me to the ...