Questions & Answers for: AOpen master cd Computers & Internet

...CD player and will not burn disks. Check which flate cable do you have for its connection. AOpen recommendation is for 80-wire ATA-66/100 cable. In case this is not the cable you have, you should ...

...at the back at slave. Just remember if you have two peices of hardware on one cable one is set at 'MASTER' and one is set at 'SLAVE'. Don't forget to connect the power lead from the power supply

cd rom connected,but all the connections are intact, Have you set the jumpers at the back of the cdrom to slave if you already have another peice of hardware on the same idr cable, if not and only the

...master (same as the cd} and installed it.When I turned my pc back I found both drive letters had disappeared. I checked the cables and everything was tight, so I unplugged the slave. Now the burner ...

...CD, or DVD)... a Master and a Slave drive. In your case, it's best to install the new drive on the other IDE port if possible. The reason is because you stated that you want to record from one to the ...

...CD/DVD Rom IDE0 IDE1 or whatever you want. Also check the first page to see if it has actually found your hard drive and cdrom. If not check the cables are connected. If they are both on the same ...

...CD-ROM drive. 3rd boot device, master IDE drive. Please use the help of you're manual to guide you for these settings. AOpen MX46L web site. http://download.aopen.com.tw/Default.aspx You must set the ...

...cd and the old cdRW ( samsuning ) it's working but my new dvd dosn't working with the sata connectors but work with the usp connectors you have to check 1) new DVD master/slave setting, it should be ...

...Master and the secondary drive ( CD ) will be set to slave. If two cables are used, both should be set to master. You can F-10 into your BIOS settings to check and see if machine is seeing the ...