Questions & Answers for: Canon loading paper problems Computers & Internet

paper loading tray of and on and then try it. Servicing will solve the problem or tell again if u won't solve. Viren I just unplugged and shut down the machine, put fresh paper in, waited a minute and

Canon pixma ip1800 --- load paper problem unable to print despite reloading paper many times. Paper feed mechanism tries to load paper but stops after approx. 1/2 in, then load paper popup window ...

Paper won't load. and Stops printing before it can start. The printer starts normally. Loads. Even begins the printing process. I can hear the little motors and stuff working. But as soon as moment ...

...be observed to have the usual problem, replace both cartridges with a one. "Loading paper" problem feedback is the same prompt as what you get when cartridges are old or refilled with unauthentic

...Try removing paper, turning machine off and on and re-inserting paper. Remember to fan (separate) paper before loading, it could be static causing the sheets to stick together and jam in the

...problems: Paper loads crooked and then jams printer. Unrelated issue is "no paper loaded" error message even when paper is loaded...Help! You might had a bit of paper stuck in there. Look real close ...

...paper, but there is. Problem loading? Have a brand new Canon MP640 printer. Worked for a day. Now it can't load paper from the cassette. It says there's no paper, but there is! I can see that the ...

Printer Canon LBP3300, When was printer it show "Load custom paper in manual feed slot". Have try to slot manual feed but also cant work. Please help to solve this problem. thanks Go to ...

...loading the paper this indication does not change. We have to switch Off-then ON the machine. In service mode we have checked the working of this sensor. it shows paper initially, after removing the ...

...paper loading problem do you have? Is the paper getting caught and not being fed through the machine properly? I would check your manual if you have one and see if you can pop the top on your printer ...