Questions & Answers for: lens control error

...lens block. On the MR pin sensor Board CD-285,CN2031 Pin No.8,9 check when peforming the manual focus control. When the focus control is not adjusted manually, check the IC751 on the Mounted circuit ...

...error codes not 0x5b are lens comunication problems and can be fixed by removing the lens and reattaching and a power reset. if probleb still persists a service may be required suddenly menu does not ...

...control stages in the lens movement ( I think error 22 means the lens won't retract). The lens housing and gear mechanism in this camera is plastic. If there is dust, sand, or debris around the lens ...

ERROR: Clean your PS2 lens: Watch this video first This will help you in cleaning the lens.You can also clean your PS2 lens by some lens cleaning DISC.Make sure not to touch lens with your hand. Clean

...lens has a lock. Control the aperture from the body, just as with a lens without an aperture ring. If the lens doesn't have an aperture ring, could you reply to this post and specify what lens you do ...

...lens error. A lens error can be caused by physical damage to the mechanism that controls the lens, or debris that is interfering with the operation of the lens. This article may be able to help you ...

...lens control system. You can remove battery and card replace battery and while switching on tap the lens hood on your hands so as to disengage any dirt or mechanism being struck. Use some air to blow ...

...aperture ring on the lens to its smallest setting (largest f/number) and then forget it's there. You can control the aperture from the camera body, the same way as on lenses without an aperture

camera has lens control error on starting up a lens control error comes up on screen and unable to solve the problem Try these procedures. 

...lens control error fuji finefix HS 30 exr Lens control error Does it say Lens control error, or does it say Focus error, turn off the camera and turn it on again? The last can happen when you touch ...