Questions & Answers for: initialize dect phone Lands Phones

setting time My Uniden 6.0 Dect, I had to set date & time with the select button on the hand set, which resets the base... Time and date should be automatically set on initial start up.

how to retrieve messages remotely dial the phone (use a cell for test run/practice) ...once you hear the message press "*" (the asterisk key) and enter your 4 digit code (the default code is 1234 or ...

retrieve messages remotely how do I retrieve my messages remotely dial the phone (use a cell for test run/practice) ...once you hear the message press "*" (the asterisk key) and enter your 4 digit ...

...Dect 6.0 phone. Model number is KK-TG4031. How do I unblock the number. I've done all the reading in the manual. But I can't get it to unblock. Is there a way. Do the following: Select MENU Select ...

...is a 2 accessory handset version. A complete list of the available Uniden DECT cordless phone manuals is here: http://www.uniden.com/index/manuals_results.cfm?cat=59 . I hope this helps. Cindy ...

Phone won t keep correct time The solution on a Panasonic phone is easy--simply register the handset to the base unit. Instructions differ by model but are usually found under "Initial Settings" > ...

how do I initiate a conference call with more than one person? You first have to had subscribed for 3 way calling, that is a feature, that has a monthly charge from your local phone company, if you ...

my fone is in silent mode==i want it fixed==no manual The Silent mode is toggled on and off by pressing and holding the # key (below 9) on any handset. I hope this helps. Cindy Wells atleast on my set

...phone number on a Dect 6.0 cordless phone model 30524 Do you mean the GE DECT 6.0 30524 corded/cordless phone? For this landline telephone, you can switch a call from one handset to another (or the ...

How do I initiate an intercom call from my Uniden cordless telephone to another unit on the same line I cannot locate a model number. All I an see is UNIDEN DECT 6.0 I notice that the button in the ...