Questions & Answers for: high pilot light

...high The pilot light on my Ml300EHBC seems to run to high. It flickers and and has a very distinct pressure sound to it. FLickers mostly blue to a little orange and seems to be too large a flame. Is ...

...pilot/med/high know is un-depressed. I put the knob on med or high with a lighted flame where the pilot light is and nothing happens. Any ideas? crappy pilot flame (not properly heating the ...

high pilot I have this heater and the pilot light is to high when heater lights w/alot of orange glow---- when not lite the pilot light is lower but still has a orange glow at the tip. I know that the

...pilot can go out due to a high limit switch being week or getting to hot and that can be shaped like a thermostat capillary or can be simply a disc with a button if even there is a high limit on your ...

...continuity through the terminals on the high limit. Also make sure you have a good pilot flame and the pilot generator is supplying over 500 millivolts. It's either the high limit or the generator. ...

...flame of the pilot light. It needs to reach a high enough temperature to produce a high enough voltage to keep the pilot light lit all the time. I do not think that the main gas valve is bad at

...high limit switch has nothing to do with the pilot light, but will shut down the main burners. It the pilot light will not stay lit, then it is most likely the thermocouple. If the pilot light will ...

...high, the pilot goes out & the heater does not light. I used compressed air to cl I can get the pilot light to light, but when i turn the control knob to low or high, the pilot goes out & the ...

...gas supply for at least 10 sec until the thermostat is heated up. Then only when the pilot light stays on continually, can you turn on the burner. Forget about changing to a High pressure

how do i turn down the pilot light on a calor gas heater? The pilot nozzle is replaceable but pilot light is not adjustable. A big pilot light can be caused by a high gas pressure.