Questions & Answers for: hardener

how much resin and hardener should i mix up, i'm building a fairly big subwoofer enclosure and i'm not sure how big of a batch to make....... this is my first fiber glass enclosure, but i want to get ...

...Kit call for using Clear Vinyl Adhesive and Filler. Is the Filler the same thing as the Powder Hardener. If not, what is the hardener for? If it is the filler, are you supposed to mix the ...

I need to mix a 2 part adhesive with a resin to hardener ratio of 100:150 by weight. If I have 1 gram of resin what is weight of hardener 1.5 grams.

printer platen rubber is hardened the rubber on the platen has hardened to the point that it wont grip the paper passing through the printer\ you need some rubber rejovinator. This will remove the ink

Cut padlock and chain off without ruling them Bolt cutters will work unless the chain is hardened steel. If it is hardened steel use a hand held grinder.

if the coils of a Toyota Clavia 1300cc are faulty can they cause the jacking of the engine and breaks hardening and finally the engine going off? What are repercussions of faulty engine coils? can ...

...When mixing paint I use ratios given by the manufacturer. Simple enough but now I need to add a hardener. The manufacture says to add 10% hardener to the mix. If I have a 3 oz. mix of paint and ...

...When mixing paint I use ratios given by the manufacturer. Simple enough but now I need to add a hardener. The manufacturer says to add 10% hardener to the mix. If I have a 3 oz. mix of paint and ...

I just filled the wood crack with the liquid hardener and now I need from you 3 or 4 tubes of the hardener that goes with the wood filler not from us on wrong site fixya doesnt sell products

...of my bathtub. I have carefully prepared it before applying the resin. I carefully mixed the resin/hardener ratio but it been almost 24 hours and it's still tacky. I don't understand because there ...