Questions & Answers for: gl 35

...GL has a problem with stalling for no reason. Always restarts, but after a few minutes. Happens on different speeds and different times, highway, stopped, driving 35 MPH, etc. crank sensor problem ...

electrical problem I removed my battery to add water to it, when I replaced it, no lights went on. The battery was on a trickle charge. I checked all the fuses and didn't find any blown. Hi ....... ...

...GL-5 oil SAE 75W-140. Mopar part no. 04874469. 9. With limited slip & models W/ Quadra Trac or Vari-Lok (front & rear axles), add 6.5% of MOPAR Trac-Lok additive part no. 4318060. CAPACITIES ...

whatis the overall width including mirrors of a 2004 1800 goldwing? 33 1/2 FROM HANDLE BAR END TO END, BUT I WOULD ADD 2" TO MAKE IT 35" TOTAL

...GL Carb/AT. The car starts well and idles. The problem is I have no power going up hills. Flooring it, I go 30-35. I can put the car in nuetral and rev it all the way up so it's not a clogged fuel ...

...GL 1100 Aspencade The factory pressure is on a sticker on the frame by the side cover. If you run 35 PSI front and rear you will have less trouble with tire cupping, better cornering, and longer tire ...

car runs like out of time or starved for fuel. won't go over 35 mph. could be a number of things. i'd try replacing the air filter first, fuel filter second and a tune up third. gl.

1985 gl1200 front wheel shakes on decelleration from aprox 35 mph upon deceleration from approx 35 mph the steering wobbles back and forth. What causes this? My 1981 gl1100 did the same thing, please ...

Bad shake between 35 /45 mph unless you excel hard front end .you cant hold with one hand . Front end shakes bad between 35/45 mph u cant hold with one hand to stop it you have to excell very hard ...

...GL GS Cylinder Head Bolts Step 1 = 47 Nm, 35 lb.ft Step 2 = 88 Nm, 65 lb.ft Step 2 = 122 Nm, 90 lb.ft Repair manuals. They are seldom free! ...