Questions & Answers for: ghost fuser unit

...very light. Prior to replacing the fuser I replaced the Toner. I have another toner on order for it, but am now wondering if it could be anything else causing the problem. clean the scan unit ...

...ghost image from the second 1/3. I do not want to indiscriminately replace units due to expense. Developer cartridges are showing 5/5 to 3/5 available. Photoconductor unit 3/5 Transfer unit 3/5 Any ...

...in the fuser roller. Change the fuser unit if you have to hand. The problem is likely caused by a lack of pressure from the pressure roller. Also check the transfer roller for a similar ghost

...ghost image. The beginning of the copy ghosts onto the end of the same copy. Can I clean the copier ? yes. although I would first check the fuser unit. It is located the exit side of the copier. let ...

is giving a ghosting image, a faint one trailing the darker , main image in b&w already changed the drum &fuser unit Suggest to check the transfer unit. Especially the transfer cleaning blade.

...How can I fix this? Hi for ghost printing basically it is 1)fuser roller surface wear n tear 2)check any fragment of paper stuck at the fuser unit. 3)fuser unit is located near the printing

Ghosting How do you stop "ghosting" on printouts on a dell 5110 - cleaned the developer several times, installed new fuser unit but still ghosts its probobly drum then you need to replece it

to a new fuser, you can try replacing the drum/imaging unit. Sometimes a ghosting problem can be caused by a bad cleaning unit (inside the imaging unit), but usually it's the fuser causing the problem

ghost printing I just changed the fuser in my printer, but it is still ghost printing. Why would that be? Thanks so much for your help. Some time the ghost is because of the drum unit, replace it, ...

Ghost writing on my Brother DCP-7030 all in one printer hjjkshpij Ghosting on machines can be one of several causes. Poor Quality/ Damp toner - Replace the toner cartridge Worn Drum Unit - Replace the