Questions & Answers for: freezer temp keep dropping

...the right temps?? If freezer temp has changed it will affect ice production, stick themomator and check freezer temp Look at ice maker make sure theres no blockage of pieces of ice slowing ice ...

...freezer seem to be working, it is showing a temp of -18 degrees & the food is all still frozen after 7 days. It is kept in an out building with no heating. Ihave been told that they will not work in ...

...with the refrigerator side thermostat? Thanks in advance for any help you can offer Set the freezer temp control to MAX cold and see if it improves. If not replace the off/on thermostat.(cold

always running, does not stay cold. every now and Always running does not stay cold. Every now and then the temp drops and controls. refridgerator/freezer just keep runing temp is ok in both

...freezer has dropped in temp to -6 and my refrigerator is rising in temp and only blowing minimal cool air. The fridge is less than one month old. ck the back of the freezer / look for ice build up / ...

...freezer keeps dropping ( now at -13) and my fridge temp keeps increasing (now at 55 deg F) It goes up approx 1 degree every 20 minutes. The fridge is less than 2 years old. What could the problem be? ...

Freezer temp keeps dropping despite putting on superfreeze switch. What might the problem be? I own an Imperial freezer and it has a superfreeze switch. The schematic electrical diagram on my freezer ...

...temp back up but it steadily stopped cooling even more. I decided to defrost the freezer, and had the power off completely for about 5 hours. When I turned it back on, the freezer worked, but the ...

freezer door assembly, shut the machine off. it should display a 5 minute timer and 4 temp readings. All 4 of the temp readings need to be above 60 degrees F. for the counter to start. Once it reaches

GE Refrigerator model PFS22SIDSS can't set temperature The freezer temps keep climbing and we cannot set. The refrigerator temps keep dropping. Cannot set Bad thermostat More than likely the pcb