Questions & Answers for: fm 240

Dewalt radio accidently plgged into 240 volt outlet.... Help!!! Well a co-worker of mine accidently plugged my Dewalt radio into a 240 volt outlet at work. It still turns on without the battery in it,

... and best place to my radio to . i live in oklahoma. in temple, tx take exit 299 east to hwy 95 and fm 93 service road. lowest prices... depending on prob with radio around $25 -$45 on most problems ...

...240 channel freqencies. with AM and FM, you double that, because you can talk on AM or FM on all the channels. If you are on AM and some one transmits on FM unless they are really close, you will not ...

what does the FM channel do? short range very poor signal,

forgot where the knobs set do u use hi or lo band, a/d b/e c/fand am or fm. have not used radio in several years and dont remember hi band d is 40 basic channel.

just installed a connex cx 3300hp not sure of settings for cb example channel 16 mode switch am fm pa? band selector switch d/a e/r f/c? band hi lo ? thanks bill it should be am selector switch on d/a

help 1' its a mobile rig. 2' dose the red light come on when you transmit? try switching to FM, to do checks. watch the metre rise during tx

is there a different fm antenna i can connect I get poor intermittent connection like the coax pin is not making contact Might help to check for a good ground

plugged 110v into 240 socket plugged 110v radio into 240 socket now won't work on 110v same thing happened to me. Let me know if you figure this out

the outer clock is on time the inner time is running one hour slower could this be because of the 1 hour time difference in europe between summer & winter months?