Questions & Answers for: fax tx function

Panafax UF-560 can't remember how to set so confirmation of every fax sent Function 7, 4, set, parameter 12, then set to on for reports after TX. Press function 74 set 12 set 2 set stop

...fax response yet after 30 seconds of transmitting it will not go thru and the error is ERROR TX REPORT at top of page. TX FUNCTION IS NOT COMPLETED tx/rx no 0293 result nh 005 did u try to do a hard ...

...tx function was not completed call the other fax machine with a cell phone, listen for fax tones. plug a regular phone in the jack to check for a dial tone. make sure phone cord is plugged into the ...

...fax, and i keep getting the same error message, "TX function was not completed" Nothing changes from day to day when this occurs. I've tried adjusting the TX start speed to all different levels, and ...

TX Function Not Completed" I am trying to fax a single page. Once the first page scans through, the fax then says that it is scanning the second page (or if I try to scan two pages, it then says it is

...FAX Menu]. 3 Touch [TX Report] on the Set 1 tab. 4 Select how to output the report, and then touch [Enter]. ? Default: The transmission report is printed according to the previously specified method. ...

...Fax tx function was not completed Cannon Fax L220 works fine except when I try to Fax a number in Poland. I get the fax tone, the page scans successfully but the TX reports: tx function was not ...

tx function was not completed Error TX report tx function was not completed It seems like the number is going through but then we get an error report. This does not happen on all the calls, just some.

...faxes through the Canon with the date & time they were sent. Any help will be appreciated. Thank you. Press> Additional functions > Communication Settings>TX fax

...fax header? change unit name press additional functions button then use the arrow - + buttons to select tx/rx settings press ok tx/rx common set. tx settings unit name ...