Question about BAFO BF-1284 Parallel Adapter
...failed - Unable to acquire TWAIN-compliant device" error is received when trying to connect USB-Parallel type to your Laptop. Well, Printer Panasonic UF4100, recommends to use only " Printer/Scanner ...
...attempt to attach it to bluetooth device failed????? Thanks Toni The scanner is not a bluetooth device. In fact, the scanner is powered through the USB cable, so it must be connected to the
...device & driver so I could connect the scanner but my computer still does not recognize the scanner. IS there anything I can do to get it to work with the usb port? There is going to be issues with ...
...connect the scanner to a PC This could be a number of reasons. First check that there is no password set on the hand held device. Go to Control Panel >> Password to delete. You may also have to ...
Question about Deskjet F2180 All-In-One InkJet Printer
...scanner shows up as an imaging device. Click My Computer (in some versions of windows), Properties. Click the Device Manager tab. Open Imaging Device. Highlight the all-in-one and click Remove. Try ...
...scanner in the device list right click and update shut down when update done restart to save your new settings now test scanner If that fails heres the drivers link from BENQ ...
...scanner fails to wake up when called. To fix this problem use the steps below: Click Start , right-click My Computer , then click Properties . The System Properties window will open. Click the ...
Question about ScanJet 2400 Flatbed Scanner
...for a compatible driver fro your device. If windows 7 failed to get a driver for you. You have to go to your scanner manufacturer's website to get a driver and install it. Hope this works for
Question about ScanJet 2400 Flatbed Scanner
Connect the printer/scanner directly with the device. In case, if you have made a USB cable connection, then make sure that the connection is not loose. You can try the USB cable that comes along with
Question about ScanJet 2400 Flatbed Scanner
computer has acknowledged the new device. Try a power restart of your computer with the scanner plugged in and turned on. If that fails, you might want to try a different USB cable (assuming it's USB)
Usually answered in minutes!
19,136 Questions
12,215 Questions
7,310 Questions
7,276 Questions
5,470 Questions
