Questions & Answers for: exahausted

1999 jeep wrangler` i replaced the exahaust manifold on my jeep and now it runs wide open. so i replaced the map sensor but it did not help 4.0l? The intake on a 4.0 has 2 dowels it sits on in the ...

QX4 sounds like a cow I'm experiencing constant low frequency "mooing sound" regardless of accelearation. Also need info on O2 sensors - I've been told that it has four, one I had replaced last year ...

Exahaust fan not working I have nu-tone 667RN unit and its fan not running. What options do I have? The best thing to do is buy the replacement motor. It is usually a pretty simple thing to change out

I have an 04 yz250f, a sweet running bike....But it has alot of blow by mixed with oil from the cylinder breather tube. The exahaust doesn't smoke ,a little carbon in the pipe but loss of oil. does ...

I have a Premium Pressure Washer CJC-1001 2.3 GPM. I do not have a hose and wonder how this is attached to the engine. Is there instructions I can obtain for this? Thanks Hello sir, my pr. washer is ...

My 2002 Honda Cr 125 will not start. After about 20 kicks it makes this popping noise from the exahaust. It has good gas and the carb has been cleaned. pull the spark plug check if it is ...

need to know where intake and exahaust cam lobes are pointing when piston is at tdc Opposite direction keeping both valves closed.

sir, my canon ir 400 machine shows an error code 803. how can i solve the my problem. give detailed information to my mail. thanking u. the code 803is for faulty exposure lamp or fault in composite ...

my 1996 ford f-150 in line 6 cyc. is giving me the code p0411 The P0411 code is secondary air injection system the air injection system does not detect air in the exahaust when introduced by the ...

I have a Ryobi model# RY34441 4cycle string trimmer. It fell over in my shed and laid on its side for several days. when I went to start it the motor was siezed up! I removed the spark plug the ...