Questions & Answers for: drum sander

...drum sander, I am getting grooves in the floor from one pass to the next, running parallel to the sanding direction. I am sanding right to left as it says. Is there an adjustment to the drum angle ...

...sander model 351.215140 Remove table assembly. Remove pointer and then slide cover up and out from dust reflector. Release belt tension by pushing tension lever toward idler drums. Note: there may be ...

...sander vs drum for a floor that only needs plate sander vs drum for a floor that only needs light sanding is this the best way to go with plate sander? my last job the drum left light stop and go ...

how to install sand paper on a 31-250 drum sander. Go to this LINK and find the part/diagram that can help you. Please thumbs or post back,thanks

...DRUM SANDER To change drums you have to remember it is reverse thread. If the nut will not because the drum keeps turning you need to either squeeze the drum or hold the shaft near the bottom where ...

...drum sander stalling out when I only turn the crank 1/4 turn? A quarter turn is too much. You should only turn the wheel a maximum of 1/16 turn. Sanding should be done with just the sand (not the ...

...drum sander? Need instructions on how to adjust table height so that both left and right are the same. Try the following web site: ...

performax 16-32 drum sander controller http://www.supermaxtools.com/products/wood/shoppro-25-drum-sander/ Supermax sells the controllers.

where can i buy a controller for my performax 16-32 drum sander ShopPro 25 Drum Sander SuperMax Tools They sell the controllers, too.

I need an operation manual for a Woodtek 109352 drum sander please. Spec sheet and video, but no manual online. https://www.google.com/search?q=woodtek+109352+drum+sander+manual ..