Questions & Answers for: Samson drivers for 170 Computers & Internet

Samson Servo 170 - 1 dodgy channel Sometimes when I switch my Samson amp on I only get sound out of one channel and have to turn the input volume up high in order to get the channel to come on. Once ...

Samson Servo 170 Amplifier Occasionally, when I switch my Samson amp on I only get sound out of one channel and have to boost the volume in order to get the channel to come on. Occasionally the same ...

Samson Servo 170 protection circuit problem! Hi the protection has kicked in on my servo 170, I believe a diode or 2 and a couple of resistors have blown which I can replace but I want to know if ...

hi when i turn on my servo 170 my protection lite stays on and i get no sound One of the channels in the amp is bad. That channel will need tobe replaced. You may need to take it to a repair shop.

Can I use my amp with PA speakers? can I use my samson servo170 amp with PA speakers Yes, but stay within the "ohms" limit of the amp.(probably 4 ohm or greater) Paul

when i turn my servo 170 on the protection light cums on so does the left channel clip light Disconnect your speakers and see if the same thing happens. If it does not, then you have a problem with ...

as soon as I turn it on I get a low-mid frequency hum and no sound from other sources comes through... Does the hum occur when the levels are all the way down? 1st thing to check is for a broken input

Sometimes when I switch my Samson amp on I only get sound out of one channel and have to turn the input volume up high in order to get the channel to come on. Once it's on it seems to be ok... ...

Blown Samson servo 170 Hi there my amp has blown and had smoke come out of the vents ...what would have gone wrong, can it be fixed or should i just bin it?thanks for helping ...

One channel not working on servo 170 read the manual: http://www.samsontech.com/site_media/legacy_docs/servo_170_260_550_man.pdf If that does not work give us more details.