Questions & Answers for: drill smoke

Gets very hot and smokes while i am using it the drill get hot and starts smoking, therefore i have to stop using once that starts going on cooling holes blocked drill is being used at too hi a ...

smoke and almost caught fire. The drill no longer works, the reverse switch does not move. You have burned out the drill motor, it is shorted, the battery smoked due to a direct short, one thing I don

drill started to smoke while useing smokes Usualy when a drill is put under extreme load the windings get hot on the armature. Sometimes the coating on the windings melts off and short together. the ...

drill XRP started to smoke when i set it down. Now everytime i push the lever (even just to open up the end to put the bit in)it starts to smoke. What broke, can i fix it? and where do i get the parts

smoking put batteries in drill press trigger starts up then starts smoking bad & stinks & stops wiring is conected the rong way ,,cheers

...smoke started coming out of the rear vents of the drill, and that it smelled as if something was burning. Once this happened he stopped immediately what he was doing and let the drill run at max rpm ...

drill, i was using it and when i plugged in the fully charged battery, it all of a sudden started smocking. thick smoke, without even pulling the trigger. I immediately removed the battery but battery

...drill I had some smoke from the battery connection to the drill and the housing of the drill had some smell of smoke. Whats up? Thanks, Bill Check what gear you in, the Makita will smoke if you exert ...

drill moved very slowly and smoke came from the vents at the rear of the drill above the handle Happens on new Hitachi drills for some reason during the break in period. If you still get the smoke and

charged battery put in drill tried to screw i screw and drill started smoking, stopped, now pull trigger and smokes I'm afraid it's dead! Burned out motor coil. their triggers have a problem and they ...