...draw but not for the powder please help Assuming that the bit the water is going into is the prewash dispenser (rather than a bleach or conditioner dispenser), why not just put the powder into there? ...
Question about Aquarius WD63 Front Load Washer/Dryer
...powder draw when the draw is closed Hi, i have a secondhand hotpoint wd62, i have cleaned all the draw and inside and placed the draw back in with powder, but when the water comes into the draw to ...
powder draw the water is not going through the powder draw or the softener part of draw we now have to manually put powder in tub lg intello wd8050fh This sounds like the solenoid valve which runs the
Question about WM-2277HW Front Load Washer
...powder and conditioner draw keeps getting blocked It seems after a few washes the machine draw gets completely blocked with all washing power being stuck in the draw. I have never had this problem ...
...powder draw from the machine then disassemble it completely making sure you remove the centre insert then rinse/flush it out completly with hot water. Before replacing the powder draw get a wire bag ...
...powder (goes in same draw) but at the end of quick wash. the oxy vanish powder has gone solid and remains in draw? what can i do ? Hi, Easy- you will need to use washing powder; unlike the liquid ...
...powder and conditioner is still untouched in the draw??? When the washing machine has finished the wash powder and conditioner is still untouched in the draw??? This video will show you how to keep ...
Question about Classixx WFL 2066 Front Load Washer
...draw there should not be any water leaking if you do this and look in the compartment that you put the powder in and see if the water is going into the compartment that you use and see which ...
Question about Classixx WFL 2066 Front Load Washer
...to wash the powder out of the draw. water don't rinse washing powder out of the draw, also it dont fill up machine. when cycle starts red light appears and stops the cycle control board ...
Question about Classixx WFL 2066 Front Load Washer
Usually leaks due to powder etc getting stuck under dispenser draw causing water to bridge across and leak under draw. Also use a pipe cleaner or cable tie to clear any blocked holes in the dispenser
Usually answered in minutes!
9,125 Questions
3,840 Questions
3,158 Questions
2,979 Questions
2,660 Questions