Questions & Answers for: Behringer dp 100 Computers & Internet

how do i put a 9v battery into a behringer bod 100 bass overdrive MANY of these pedals have a little release that allows the pedal to hinge upward and the battery is underneath the pedal part itself.

how to connect mixer 100 fx to uca 202 and laptop Just connect: one output from 100fx to uca202 line in. Connect an output that corresponds what you want to get (e.g. if you're going to record ...

europower pmp 3000 120v or 220v ? Unit has wide range power supply will operate on 100 volts to 240 volts without any change other than possible plug adapter to mate with each countries receptacle ...

I need to know the fuses to replace them. I know they are 450W but the amperage is not defined Hi, This is what I found. 100-120V 10A 220-240v 6,3A Regards, Gerard

100 can OPERATE on phantom power, not supply it. If you have a mixer that has phantom power then you have no need for the DI box. DI boxes are to convert unbalanced signals to balanced to send via XLR

...fuse, yes. It will require to open the unit to service. Do lights still come on? Have you tried headphones with it? This unit takes a 100-120V T 6.3A H 250 V SLO-BLO fuse. They can be found at Radio ...

I don't have any sound from it.Accidently unplugged the 1/4in jack. it made a pop. Something needs repair. I don't have any sound from it.Accidently unplugged the 1/4in jack. it made a pop

are behringer pmp5000 220 volt? Yes, the SMPS handles 100 to 240 at 50 / 60hz there is not a physical switch it is automatic for world wide use.

When i plugged it in the lights started flickering and some smoke came out. Now when i plug it in it won't turn on Should i take it to get it fixed or throw it away????? sounds like you blew some ...

BEHRINGER K3000FX will not power on It may be likely that you've blown a fuse. This will require removal of the amplifier unit from the housing. The fuse is a 100-120 V~: 6.3 A H 250 V. You should be ...