Question about 2488 Portastudio Multitrack Recorder System
...dc-02 fc yesterday, I am trying to record music from my karaoke system, when I recorded I pressed assign A & B, then first two Rec on the left hand sign, then press rec and play. I can see on the ...
2. If power adapter is Ok, connect it & see if the power LED on the laptop will glow when you jiggle the power connector in various directions. If yes, then the DC jack might be loose or damaged,
2. Bad motherboard. DC Jack diagnosis: 1. Test power adapter for output voltage. Bend the power cable in various directions while doing this to be sure that there is no broken conductors in the cable.
2. Bad motherboard. DC Jack diagnosis: 1. Test power adapter for output voltage. Bend the power cable in various directions while doing this to be sure that there is no broken conductors in the cable.
...dc controller PCA (location J92). 2 Measure the resistance between the cable connectors. 3 If the measured resistance is not approximately 160 ohms for the HP LaserJet 4200/4300, or 110 ohms for the ...
...your motherboard out, You can de-solder the broken DC jack from the motherboard (if necessary) and solder the new one on. DC jacks are generally 2-4 solder points and fairly simple to press back
Question about LaserJet 4250 Printer
...2 dc jacks, an external monitor and 4 new sticks of ram. Last time putting it together was with a NEW processor, motherboard, dc jack and ram. What could be the reason for this computer not working? ...
...2 blue from furnace and join the 2 blue together to see if furnace runs. That just by-passes thermostat. What is furnace in? 12 volt-dc, or maybe 120AC, with 24V transformer if park model or
...2 REDS are DC 12v + positive And they can be hooked together to your DC 12+ power source. The 2 BLACKS are DC 12v - One of the BLACK wires is for the infrared LEDs and Camera and will connect to your ...
Question about OutdoorCam Security Camera
...sound . 2007 chrysler aspen 2 wheel drive. Schelley make sure u have positive on positive and negative on negative, see if you got 12 volts dc when you sound, if 12 volts change horn if not check ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions
