Questions & Answers for: datamax position fault error

Datamax M Class printer Problems I am having trouble when i changed the size of my labels the printer light is blinking ERROR. The on the printer screen is says position fault?????? What is wrong with

...datamax i - 4208, the cutter doesn't cut tickets, if i'm sending test file from the prin - it cuts, but when i print tickets from the ms access - it doesn't! and also i've got some strange error - ...

datamax I4208 Gives me position fault. Error message (I think) is 08.03J? Any help position fault is normally a problem with either the formatting or the printer is not calibrated correctly. Hold the ...

...Datamax I4308 returns a position fault error if it cannot sense the label gap where its supposed to be, or if the sensor returns a value outside the permitted range. Re-calibrate to correct the

...Datamax Mclass printerwhen we switch on the printer it comes with error on the display screen as out of stock and position fault. could any one please help? Check to see if you are using the right ...

...datamax i class he give a fault "top of form fault" i don't no what that is The error is indicating that it cannot calibrate the media. Try holding in the feed key for approx 10 seconds and see if it ...

...position fault error. Calibrated machine says faulty sensor. have you monitoerd the values which are given by your sensor? Have you checked that you have selected the right type of detection before ...

fault. position fault head cleaning fault, you need to remove the option for head cleaning. The position fault may be due to either a wrong label size, wrong detecting sensor selection or your printer

...position fault" in the error screen? Amr141: "Position fault" was refer to label not detected by the printer. You can make a quick calibration press and hold FEED button by 5 - 7 seconds and ...

...fault Position faults and/or top of form fault. The manual is no help with his information. Hold in the Feed button for 4-5 seconds, which causes the printer to attempt to "Auto-calibrate." If that ...