Questions & Answers for: dash lights step breaks

...dash keeps coming on. It is a solid circle with dashes around the outside. What does this mean. its the breaks if it is a circle with 3 dashes on each side it is the break sensor it indicares you are ...

...lights and dash lights. Dash lights come on when you hit the brakes. Tail lights are not working at all If the dash lights are coming on when you step on the brakes you have a grounding problem. The ...

speedometer lights are out and my break lights are also out but not when i step on the break wat can i do? Your park light fuse is blown. It's the same fuse that powers the dash lights. Replace it.

...lights. You have a bad break switch. It is located under your dash, above your break pedal. The stem of your break pedal, when pushed down, activates the break switch. When you push, the break light ...

...MENT OR REPLACED ... I SAY THIS BECAUSE YOU SAY JUST TAIL LIGHTS AND NOT UR DASH LIGHTS AND FRONT BLINKERS ARE ON ALSO ALSO THATS WHY I THINK ITS YOUR BREAK SWITCH LOL LET ME KNOW IF THIS IS IT ...

...step on the break the oil light come on when I press the gas it goes off. What can cause this to happen? Look under the dash by the break pedal, it sounds like you have a wire grounding to the metal ...

...dash comes on and all 3 lights on the back are really bright even without me stepping on the brake. Then when I step on the brake, the brightness only increases marginally. Is this a problem with the ...

lights in my dash both light up when i apply the breaks and only works when i let go of the breaks cant find the problem anywhere its only when I apply the break that both signal lights come on in the

i step on break pedal but i have full breaking power I changed the whole master abs cylinder but the dash board light still comes on ABS lights are usually triggered by a sensor, not a master cylinder

...lights light up and which ones don't. I am assuming you are seeing the brake failure lamp on the dash light up - and not some other light. Once you have identified the lamp that doesn't light up, I ...