Questions & Answers for: Soyo cpu frequency Computers & Internet

Question about SY-7VEM Motherboard

1 Answer

sy-7vem soyo cpu upgrade just installed a pentiumIII 1.4 ghz intell cpu.is there any switchesI need to change to operate?it was 100hz it is now 133hz Most of the new boards will automatically detect ...

Ad

Question about KT600 Dragon Plus Motherboard

4 Answers

...came on for 1 sec then long beep. Now this is what i have done. read troubleshooting guide. check cpu fan, replaced , checked cpu fan connector, checked. Even replaced cpu with another. Cleared

Ad

when I change the mobo jumpers from 100 MHz for 1.90 on the CPU to 133 MHz for the 2.53 the CPU is rated at, it won't boot. SY P4 VGM mobo lets you set jumpers for 100 MHz, which runs the CPU at 1.90,

Question about P4VGM v1.0 (MB-SY-P4VGMV1.0) Motherboard

1 Answer

...frequency. This is called "overclocking". You will probably be requird to rebuilt the entire cooling tower, over the CPU socket, especially you will need a new and more powerful blower... One can get ...

Question about SY-P4I865PE Plus DRAGON 2 v1.0 Motherboard

1 Answer

...512mb DDR400, 120gb IDE hard drive, and XP-Pro. The problem: System locks up from time to time(with cpu described above) but has so problem when run with another cpu I have (2.8/1m/533). Problem ...

Question about KT333 Dragon Plus Motherboard

2 Answers

What dual core CPU is compatable with the dragon plus? hello sir, hi im afraid that the dragon plus has no AMD x2 (DUAL CORE) compatible CPU. if you want a dual core motherboard compatible, get the ...

Question about KT333 Dragon Plus Motherboard

1 Answer

...If it works fine after that slowly change the settings to your specifications. Sounds like the cpu might have been overclocked to high or the cpu is

Question about KT333 Dragon Plus Motherboard

1 Answer

What CPU's will th SYK7Vme board support?? That's a socket 462 (socket A) board. That is for early AMD cpu's. Here is a link to some socket A processors ...

Question about KT600 Dragon Plus Motherboard

1 Answer

will not start 2 long beeps First off, if you recently upgraded the memory or CPU, put the old components back and see if the upgrade was the cause of the problem. Next, make sure your power supply is

...part needed is the plastic base that attaches to the motherboard - it is a box that surrounds the cpu, and the cpu fan clips on to it. From the invoice 5 years ago ; SKU: AS-P4FH1 Product: P4 Cpu ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...