Questions & Answers for: code p0601

FAULT CODE: P0601 light staying on dash fault code is: FAULT CODE: P0601 ENGIN CONTROL MODULATER MEMORY CHECK SUM ERROR fault code:po234

the above codes seem to have a common cause, they all list a bad ecm (computer) as being a cause, and the last code P0601 points specifically to a bad computer. sorry for the bad news, hope this helps

code P0601 in most cases means the PCM has gone bad. This is possibly due to a short-circuit inside the PCM. Or, if you disconnect the wires/connector from the PCM while the battery is still connected

...code p0601, first starting in am, the engine reeves up and rpms are at 1200 no acceleration on gas pedal. after show long restart and all is fine until next day. The code po601 is for P0601 Internal ...

...code p0601 Hi Again,here's another link,to your P0601 code. P0601 OBD II Trouble Code This is your computer failing it check test. It does this several times a day. THe computer runs all sorts of ...

...dealer replaced 3 months later it's bucking at highway speed dying at 30 40 mphs engine light comes and ges only code p0601 Hi Charity,here's a link on your P0601 code. ...

...code says P0601 Definition of Diagnostic Trouble Code P0601 Category: Powertrain Definition: Internal Control Module Memory Check Sum ErrorNote: This definition of P0601 is applied to all ...

Code P0601 2008 Chevrolet keeps stalling scanner reads code p0601. What can be the problem?? Thanks code p0601 refers to engine control module (ECM)--memory check sum error==causes--- ECM check with a

I have a code p0601 what does it mean where id you get code? whomever told you should have told you what it meant. all codes are available on line, https://www.obd-codes.com/p0601

...code (DTC) P0601 stands for "Internal Control Module Memory Checksum Error." It is triggered when the powertrain control module (PCM) detects an internal problem, typically a failed Memory checksum ...