Questions & Answers for: code 52 paykel washer

...Code 52 is a loss of water during recirculation cycle. Possibly due to a faulty divertor valve. Check to see if water is circulating back into bowl & no water escaping out of the drain hose. May also ...

code 52/ stops washing and you have to start load over again As per the manual 52. (00110100) Diverter Top-up Fault More than 6 attempts have been made to top-up the water level in the bowl. This then

error code 52. what does this mean? Code 52: Is a diverter valve fault Action: Remove the diverter valve and check for blockages or a broken hinge mechanism.

code 52...I restart the washer and it goes for the whole cycle the second time around...no beep-no message. Code 52 means it has had to keep on topping up the water level. You are losing water. During

...code 52 wont fill with water just keeps running Diverter Valve Fault Remove Diverter Valve (Down near the Pump Under Bowl) Check for Blockages or broken hinge mechanism Check resistance of wax ...

...code 52 error code 52 51. (00110011) Phase 5 ECO - Recirculation Fault The product has detected that it is losing water during recirculation. Primary Source - Diverter Valve Wiring Action - Check ...

...code 51, or sometimes 52, which indicates the diverter valve. When I press the power button twice to turn the machine off and immediately back on, sometimes it returns to where it was in the wash ...

...paykel kelvinator washing machine model MW 52-F it goes throuh its deep rinse cycle then wont spin just beeps at you any help would be much appreciated Try clean it. Good luck This will explain the ...

...code 52. what do i do next? Code 52 is not listed, but they all say to call for service! ...