Questions & Answers for: HP close upper cover Computers & Internet

no paper jammed under the cartridge, remove paper tray 1. The paper may not have fed all of the way into the printer. 7. Reinstall the paper tray and the toner cartridge. 8. Close the upper front door

...Close the upper front door. To clear a jam 1. Remove all media from the output tray. 2. Check the rear access panel or the duplexer. a. Push the button on either side of the rear access panel or the ...

...Close the laptop. Turn the laptop over, bottom facing you. Remove the Memory Module Compartment Door. (Looking at the bottom of the laptop, this compartment door is in the middle. It is rectangular ...

...upper scan area Depending of how many scans made your machine there may be three possible reasons: 1) the scaner cover it is not firmly closed 2) paper feed roller is dirty (clean it) 3) paper feed ...

...Upper cover open error msg occured while giving the cammand there is a lever in the top vover to close the cover sensor, and it may be broken or bad seated change ur printers teflon flim (fuser flim) ...

...not able to print. Please help. check that sensor function while open / close upper cover, some time hook type sensor connector broken and need replacement. check also roller for possible stock

Close the ETB. 9. Remove the small black cable cover (RC1?5147?000CN) on the left side of the printer by carefully snapping it out of place. 10. Remove one (1) grounding screw from the ETB harness. 11

upper part of the cartridge forward until it clicks into place. Slide the tri-color cartridge into the left slot. Slide the black or photo cartridge into the right slot. Figure 7: Insert the cartridge

...loaded on the automatic document feeder (upper tray), lift the cover and remove the remaining paper, gently pull the paper from the rollers, close the cover and you are done. Hope this helps you

...Close the ETB. Remove the small black cable cover (RC1-5147-000CN) on the left side of the printer by carefully snapping it out of place. Remove one (1) grounding screw from the ETB harness. Pull out ...