Questions & Answers for: how do i check my cdi

...green wire coming from the pulser coil going to the CDI; and of course, check if the CDI (black / white) is connected to the ground.Postback results of tests. Good luck and thank you for using

...cdi unit itself, how can I check that it is working correctly? did you check the primary coil? the ignition coil?if you think that these are all good,then you must replace the CDI.You cant test a CDI ...

...Check your CDI on the other bike is a good option. if it was perfect before the CDI change then the new CDI is the only variable. Wont be shimming.the valves need to wear to change that setting, and ...

...CDI? can I see the diagram? If there is power into CDI but not out to coil then check that kill switch works, also check side-stand switch If OK & coils are earthed then get CDI ...

...have a cdi box that will interchange with mine check power to coils before you give up on cdi I have the same problem.. If you have found the cdi could you please contact me. ...

I checked switch don't know how to check cdi ,help greatly appreciated cdi''s either work or they don't if the switch is working and you still have no spark the cdi is not working

...not working my motorcycle not working bec. of cdi.i don't know what to do The only way to "fix" a bad CDI is to replace it. Check all of the wiring for damage and breaks before installing the new

New coil , new CDI still not firing If it's a/c cdi model disconnect key switch.d/c cdi check keyswitch link or conect with bit wire.check kill switch line also.

...CDI of a 50cc TGB Bullet Anon, Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other ...

...CDI and coil so look at fuel NO spark indicated , check for 12 volts from the ignition switch on the start circuit Ignition switches have to power wires to the coil on gives power when cranking and ...