Questions & Answers for: HP channel master hook Computers & Internet

...master in each ide channel. set up to master (not single) the one on the end of the ide cable and set up to slave the one attached to the midlle of the ide cable. check that both hard drives are ...

(2) Devices in IDE - Master and Slave. For example Cable 1 (ide channel 1) Master - HDD Slave - Tape Drive Cable 2(ide channel 2) Master - CD/DVD drive Slave - HDD Do you have a diffrent type of cable

...tv connection or set top box. You can't do it over the internet. Yes and no. If you want all the channels of your cable company the card must be hooked up to a wall outlet for the cable. If you ...

master on your primary IDE channel. If the CD is the only other IDE drive in your box you can put it by itself on the secondary IDE channel.Make sure you set the drive jumper for each device to Master

don't know how to connect suing wireless or even anything if that I just purchased a hp presariov2000 notebook. It's got,AMD Turion mobile tech,broadcom 802.11b/g WLAN, net adaptor, WAN Miniport for ...

I recently moved and when I hooked up my computer, the tower will not power on. What could be causing this There is a master power switch switch on the back of some computers, just under where the ...

...do you have installed? Try only using one Optical drive and one hard drive both on separate IDE ...

39;t work you should try a new hdmi cable. And if all else fails you can configure your audio to a different channel, like the speakers on your laptop or you can hook up some external speakers as well

channel 1 on the motherboard. 2) Make sure that all the CD/DVD drives are on IDE 2 or on SATA 3) Make sure taht the Jumper setting on the back of the HDD is set to MASTER 4) Login to bios and make see

...keys,generally....it's usually a generic('Master' (NOT as in 'MASTER ...