...cable box to back of TV inputs with the red wht yel RCA jacks but will not work on chnl 3 my TV is a GE model 31gt660 i have the org remote can u help use tv/video or input button to switch to av ...
...cable broke off into my input packs My input cables broke off into my input jacks of my home theater sub woofer. Any suggestions about how I can fix or how much it how cost to have someone else fix? ...
during installation if none of those are ur problem get the amp checked out change the audio inputs cables, if 1 and2 works, is something on cables, some broken cables or some device connected. if not
Question about MG100HDFX 100-Watt Amplifier Head
...or broken volume controls. Another one is a bad switch contact on the jack for PA input connection. All these are internal and require servicing. External problems are guitar and cable
Question about Mg100dfx 100-Watt Combo Guitar Amplifier
...input jack itself. This is a CHRONIC problem of amps because people trip over the cord and it yanks the cable and jack sideways breaking it or the solder where it attaches to the circuitry. To avoid ...
input cable... what do i check first for fixing the 1st channel? Same thing... they probably broke both jacks. Sometimes the guts of the jack is broken and it doesn't appear to be broken but is broken
...cable. PLugging into the input should turn the pedal ON, not off. The switch on the jack may be broken or soldering to the circuit board may be broken OR worst case, there is a crack in the circuit ...
...and as a result it wobbles around and will only charge in certain posistions. The input jack is just that. It connects to the system board via a cable. The power adapter jack needs to be
Question about Mt 2 Metal Zone Effects Pedal
...input guitar cable ( a seperate contact is made at the jack). Sometimes this can be broken. Usually this failure is caused by someone stepping on or yanking a cable and the solder is broken at the ...
input jack fell inside Yes, the jack MAY actually be broken. It will need to be serviced. Run cables through the handle to avoid plugs from being yanked sideways and breaking the jacks. We had the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
