Questions & Answers for: burner ignitor

...burner not the ignitor. I pulled the front ignitor a bit away from the burner and now it is working normally. Hope this helps. Jsut a guess - see this solution: ...

...burner, the LR ignitor starts to spark. I have purchased a new ignitor for the RF burner and it does not correct the problem. I know the replacment ignitor is good as it works on the RR burner. Why ...

burner ignitor will not turn off after the burner lights Viking This is a Viking 30" range. Three burners and the oven work fine. When the right rear burner is lit (which is seldom) the ignitor ...

...burner ignitor does not spark on one burner Hi. these ignitors are really easy to diagnose. all to do is inspect the wires leading from the control to the ignitor/burner assembly. if the wires are in ...

...burner. If not, the ignitor is probably bad. If the ignitor is not the problem, look for dirty or defective sensors that will keep the burner from coming on. If these sensors do not sense the light ...

...burner. The spark ignitor switch that is located on the burner control. (( one for each control )) The spark modual. the modual creates the hi-voltage spark. If the burner that does not ignight with ...

...burner ignitor wire connects to the spare lug on the main ignitior module. That one module, controls all the spark ignitors at each main burner and the side burner. When you press the button all ...

ignitor or burner, so I assume you are talking about either a BBQ grill or gas range. A suggestion: Clean the ignitor tip with a CLEAN and DRY green scouring pad; check that you have gas coming out of

ignitor switch for the large burner. Here are a few things you can try to troubleshoot the issue: Clean the ignitor: Sometimes the ignitor can become dirty, which can prevent it from working properly.

...ignitor. I installed new burner tubes and ignitors. Problem is that new ignitors do not heat up at all. The broiler ignitor works fine. Any ideas on what might keep the oven burner ignitors from ...