Question about Pentium M 765, 2.10GHz (BXM80536GC2100FSL7V3) Boxed Processor
...computer still is running sluggish. I've been to intel's webpage and d/l thier ID utility and it says that the processor is running at 0.14ghz. Why is this? Does this just have something to do with ...
Question about Athlon643700+, 1MB L2 Cache 64-bit Processor (CUAMD370064)
how to burn and download instructions help How to burn and download instructions for what ? :)
Question about Sempron 2800, 2.0 GHz 2800+ (SDC2800DUT3D) OEM / Unboxed Processor
...burned Processor ? tried another motherboard ? that will tell you if you git a burned processor yes i tried another one , the Asus A7600-x but the problem still remain. i should throw the sempron i ...
Question about Sempron 2800, 2.0 GHz 2800+ (SDC2800DUT3D) OEM / Unboxed Processor
...PROCESSOR COMPUTER WILL NOT TURN ON. HAVE CHECKED POWER AT WALL, CHANGED POWER SUPPLY, CLEANED BOARD, REMOVED AND REINSTALLED PROCESSOR AND ALL CARDS When you reinstalled the processor, did you put ...
Question about Pentium 4 2.40GHz 512/400/1.5V processor CPU - SL65R
where to download ethernet controller driver i just formatted my pc not knowing i dont have the drivers anymore I assume you have another computer since your sending this message. If you have a noname
Question about Dimension E510 PC Desktop
computer then se it it works. 2. The processor is worn out, sustained damage or burned. Replace it with a good working one to test on your motherbard and see if it works. 2. The motherboard is the one
...processor of your computer was overheating that's why they are going to restart itseft. The characteristic of the processor is; when the processor have exced the maximum heat required, they are going ...
my emachines e627 laptop wont burn cd after burn complete the cd comes out blank Test burned CD in another drive after burning. I had a drive that did that just before dying. Also make sure the ...
Question about eMachines Desktop PC
...Processor. Run the computer for 24 hours, and see if everything is chiily. (Computer still works OK) This is a "Burn-In test" Works OK for 24 hours? Then go back into BIOS Setup, and go up one more ...
...computer tends to shut down when the procssor ovrheats and if u removed the processor or the heatsync for that matter you have to remove old termo pate and replace it with new termo paste otherwise ...
Usually answered in minutes!
19,136 Questions
12,215 Questions
7,310 Questions
7,276 Questions
5,470 Questions