Questions & Answers for: broken turntable

broken, the turntable won't turn. To find out if this is your problem, gently lift the "platter" straight up (it should easily slide back into place) and visually see if the "rubber band" is in place.

...either come off, or is broken. Lift up the turntable platter, and you'll see what the issue could be. The platter just lifts right up. - OPTiC Turntable Technician turntable push start will not turn ...

...turntable swingarm skips to last cut Most likely your stylus (needle) is bent, broken or missing. Check to see if it's there or not. If it's broken or damaged, you will need to replace it. Under the ...

Turntable wheel under glass tray broken Can I still use microwave if the turn table wheel that turns the glass tray is broken. Sometimes the wheel if put togehter where broken is laid just right it ...

...On my turntable (a totally different model) the turntable lifts off. The belt has either broken or fallen off try http://www.needledoctor.com/Turntable-Belts

...turntable has a broken cover hinge. Since they just slot into the body of the turntable and the cover, I was wondering if you could replace them? Yes they can be replaced. Contact the store you ...

...turntable problem. Broken belt? If you lift up the mat of the deck you should see a large whole in the platter. Rotate the platter by hand and you should see if the belt is attached or not. If broken ...

...broken drive coupling. The turntable motor is very difficult to turn by its shaft. so if it turns easily it is probably a broke coupling. NEVER force your turntable around by hand or you can break ...

...broken on my Sony Turntable, and I have failed to fix it. Isther someoneto whom I could take it, or send it? The hinge is broken on my Sony turntable, and I have failed to fix it. Is there someone to ...

turntable motor has died or a wire going to it may have broken. It is also possible that the connection between the motor and the drive block has broken. Probably better have a tech look at it for you