Questions & Answers for: amp speaker plus minus Computers & Internet

Question about Octane-R 15.0:1 Car Audio Amplifier

1 Answer

...speaker. If I just hook up one side, it clips and the amp's protection circuit kicks in as soon as I turn up the volume. I tried jumping minus to minus and plus to plus but doesn't seem to work... I ...

Ad

Question about Octane-R 15.0:1 Car Audio Amplifier

1 Answer

...be just 2 wires a plus and a minus to the amp. Then follow the amp bridge wiring which should be found right above the speaker terminals it will be left plus to right minus or the other way ...

Ad

Question about SC-PT770 Theater System with Wireless Speakers

1 Answer

...amp, will probably be spec'd for 6-ohm or higher loads. Not knowing to what receiver you want to connect them: IF you want to try it, don't destroy the existing speaker connectors; instead, get some ...

Question about SC-PT770 Theater System with Wireless Speakers

1 Answer

...the amp 4000watt .with 2 15s .how would i wire it up wire the two speakers so 4 ohms becomes 2 ohms.The plus goes to plus and the minus to minus. run the amplifier in bridge mode if it is ...

...amp them. If not, leave them in place and connect your speaker wire conventionally - plus to plus, minus to minus. The picture here... http://community.whathifi.com/forums/post/265617.aspx shows what ...

Question about MRP-M350 Car Audio Amplifier

1 Answer

...amp and then I have 2 10 Kicker Freair F10A Subwoofers. What's the best set up for this combo? From the plus(+) of the speaker output on the amplifier run a cable to the plus(+) on the voice coil of ...

Question about A4c Speaker

1 Answer

...speaker (like bi-amp capability, which it clearly has). Tie the 2 minuses together; and the two plusses to each other and run your normal plus and minus to the plus and minus on the speaker. Be ...

Question about A4c Speaker

1 Answer

...minus to amps minus) this will result in 2ohm speakers. if your amp does 4 ohm then use either one speaker for 4 ohm or two speakers in serial connection (in row) but you will have then 8

Question about A4c Speaker

1 Answer

...speaker (amp plus to speaker plus, speaker minus to another speaker plus; that speaker minus back to amp minus) and this will INCREASE impedance some, which will in theory reduce effective power ...

not label left right or bridge. Look under the amp...there might be a diagram or sometimes it shows by the speaker terminals theirself....google it or in my experience its the two outside terminals...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...