Questions & Answers for: amp modem working

amp;#1567; There is no Vista Driver for this modem. They want you to buy a new one, and that's the only workable solution. Unless you wanna format your PC and install Windows XP. In this case you need

...amp; faint. Dial-up modem not working. Line volts drops to 9 (plus nine). Modem works fine at a friends & their line volts drops to -12 (minus twelve). Since the modem works else where but not on ...

...modem & simply took the ethernet cable I had plugged in to my laptop & plugged it into the PS3. THAT was the problem. I did not reset or unplug the modem before changing from one piece of ...

...just select the modem installed in your laptop. if it is still not working, have the modem replaced

...modem. Oh & if you're trying to use windows 7 on a dial-up connection,it's not going to work well. Microsoft pretty much stopped any support for dial-up on the newer operating systems. So if this ...

...from the modem & the router then make sure that the modem & router are completely shutdown. then power on the modem first & then after 15 sec power on the router as well. Things will ...

...modem first & then once the modem is on completly plug the power to the belkin router. The light will turn green & start working. This is an intermittent connection. To avoid this happening ...

...USB modem & when I connect it with mac it never show up...so I googled ZTE for Mac & I found a driver update & update for connection manager . After installing them the modem work as ...

...amp; Modem must be paired. Read manual to do this, if not contact both Router & Modem manufacturers. You can also contact your Internet Provider for Support. Please send sketch of configuration ...

Would like to know if this is a Voice/Data/Fax Modem? This a voice/Data/Fax/ Modem. I was using it on windows xp, but does not seem to work on windows & Voice/Data/Fax Modem