heater will not stay lit we have a model#CBN20T wall mount natural gas heater we can get the pilot light to light but as soon as we let up on the temperature selection knob we hear a click and the ...
Question about ReddyHeater® R115DT Utility
I need someone to come out and service our heater. We bought it last year but not sure about a warranty. The knob to turn it on is loose and it wont come on. Can we buy the knob or does someone have ...
The pilot light goes out when the control knob is released, or a few seconds afterwards. When the pilot stays on, if the flame knob is turned, the pilot goes out immediately clean pilot blow out with ...
We can not get the pilot light to stay on to light Press and hold the knob to initiate pilot lighting process. Once the pilot is lit continue to hold the knob down for about 30-45 seconds in order for
...I light the pilot and release the know the flame goes out 1. Try holding the knob longer 2. Locate & clean the sensor, a tube that's sticking into the pilot flame. Use a green scotch-brite or ...
KNOB to controll heat level is broken. Mike what I do if Knob pin that move the pilot pin down on gas vavle is broken there no replace part# for it. You got replace gas control valve at a tune of $180
won't stay lit. can't keep running If it has been cleaned and serviced annually, the Oxygen Depletion Sensor (ODS) is probably clogged with dust, dirt and/or pet hair. In which case, the ODS is ...
Question about GWN10T Wall Mounted Panel Heater
pilot light is ok burner will not ignite. the flame goes out soon as i release button. You seem to have left a mixed message, as far as the problem is concerned. However, I think I have figured it out
I have a Desa EFP33PR ventless fireplace. In Auto it works just fine. In Manaul the pilot will light but when I release the gas valve control knob it goes out. Some times, if I rotate the control knob
Question about Unvented Gas Space Heater
...get the pilot light to light, but when i turn the control knob to low or high, the pilot goes out & the heater does not light. I used compressed air to cl I can get the pilot light to light, but ...
Usually answered in minutes!
