Questions & Answers for: Roland amp knobs Audio Players & Recorders

...pot where the lead wires go into it... I use CRC226 to restore volume and gain pots in many guitar amps that become noisy. Usually I do it from inside the amps where I can get to the slot where the ...

...amp that begins humming the moment i turn it on. its a normal low frequency hum. nothing is plugged into it, and when i ajust the volume knobs it does not effect the sound. How can i fix this First ...

distorts my sound The problem is probably due to the output level being to loud, thus distorting the unit following the CS-3. (other pedal or amp). Try backing down on the level knob. Hope that helps!

my boss me 25 pedal's sound isn't as clear and good as the demos' sound. My amp is a randall RT100 which is a valve amp and my guitar is an LTD with the custom pickups. so the problem is the setting i

...the keyboard (turn volume up to around 70% or so) and use less volume at the input gain of this amp. Use more at master volume if the amp has one if needed. If the hiss is there with NO input ...

knobs at max, from both headphone and main output. Tried factory reset. There is more idle buzz than I remember hearing, and when I strike a pad, I can hear the sound very faintly coming through. Seem

...knobs are in the middle(12 o'clock). How do I keep my amp from distorting? You left off the one bit of info we need... however, make sure the volume control on the keyboard is around the halfway ...