Questions & Answers for: Procom amp knobs Heating & Cooling

Control knob The control knob has a small metal clip that fits over the shaft, it bends and just spins on control shaft. You should be able to get a new knob from Master Parts. You can contact them ...

ProCom blueflame heater pilot light difficult to light I have a ProCom blueflame heater. There is a dial on top to operate it. The lighting instructions say to move the knob to "pilot", hold it in the

Pilot Lught I'm having problems keeping the pilot light going on initial start up. The pilot lights fine but it doesn't make any difference where the control knob is, it (the pilot) will not stay lit.

Looking for: ProCom Model MNO60HBA (about 3 years old) 6000BTU-Natural Gas-Serial#3620775. I want 3 of the plastic like adjuster knobs on top of the heater. Not the igniter button but the one to allow

The control knob is stripped. I need a new knob You can contact Master Parts at 800-446-1446. They carry parts for ProCom units. These knobs are universal, (one size fit all) just buythem in pairs at ...

If you hold down the knob, to allow the propane to come in, and then click for the pilot, it will come on. Immediately after you let up on the knob, however, the pilot goes back out. Plenty of propane

to hold the knob down for 30 seconds after the pilot lights, then release the knob, it will pop up & you can then rotate it to lo/med/hi and the heater will come on.

Touchpad lights up but no functions work First be sure that your Pilot Light is burning. As you know, it lights electronically. According to what you described the Owners Manual in the Trouble ...

Burner won't light, pilot is burning just fine. We are installing a new ventless heater. The pilot lights according to the manual, however, the burner won't even attempt to light. Even if we ...

How to fix a Control knob stuck on a procom gas heater model number MN180TPA Spay wd40 on the knob some times these are stiff to operate some you have to push down to turn on/ off