SOURCE: cannot remove handlebar grips
Pry under it with a flathead screwdriver, athen pray it with hairspray,and turn on it until it comes off.
SOURCE: Cannot remove grips on the handlebars of my Suzuki Boulevard C-50
If you have an air compressor and air gun tip simply
insert the tip into the grip and apply air but
you need to remove the vibration dampeners first
SOURCE: How do I remove old and fit new handlebar grips?
They are usually glued on. Use a razor knife to slice from the leading edge to the end part, and tear them off with pliers.
It is important to get all the old glue and rubber off before applying new ones. Use a solvent like acetone or something if need be.
When clean and dry, get a mean adhesive from your auto parts store and coat the bar with a light coat. Slide the grip on, but once you start don't stop, until it bottoms out on the handle.
SOURCE: how to replace right hand throttle grip 2003 ultra
Remove the switch housing screws and spread it away. Loosen the adjuster locknuts on the throttle cables and adjust cables in, this will allow you to lift the cable off of the throttle grip. Be care full not to lose the barrels.( the small round caps on the end of the cable.) Assembly is the reverse. Make sure to check proper operation of the throttle before starting the bike.
276 views
Usually answered in minutes!
×