1
teddibear10 posted an answer for this Janome Memorycraft 9700 Computerized Sewing Machine:
"When the needle suddenly moves out of position, is it possible that the machine is..."
teddibear10
teddibear10 posted an answer for this Brother CE8080PRW Limited Edition Project Runway Sewing Machine:
"Chances are, if the case is not opening up, then there are still a few screws that you..."
teddibear10
teddibear10 posted an answer for this Sewing Machines:
"There is a very good chance that the machine needs to be cleaned thoroughly and oiled. If..."
teddibear10teddibear10 posted an answer for this Elna Sewing Machines:
"Check to make sure that your bobbin is turning the right direction. It is so easy to get..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"You may have a burr from an errant needle strike on your bobbin case or even on the bobbin..."
teddibear10
teddibear10 posted an answer for this Singer NKOY2401:
"What a cute little machine! The bobbin is right under the needle. The needle will poke..."
teddibear10teddibear10 posted an answer for this Singer Sewing Machines:
"I'm guessing that you may have had a power surge that caused an overload, OR the machine..."
teddibear10teddibear10 posted an answer for this Singer Sewing Machines:
"Have you loosened both screws before trying to move them? Usually both have to be..."
teddibear10teddibear10 posted an answer for this Janome Sewing Machines:
"For some reason, your machine thinks that there is something in the way, and by "lo", I'm..."
teddibear10teddibear10 posted an answer for this Janome Sewing Machines:
"If you check on your machine, there will be a switch or dial (depending on model) that..."
teddibear10teddibear10 posted an answer for this Necchi Sewing Machines:
"Is the bobbin winding mechanism engaged? If so, it may disengage the wheel. I have a..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"Tighten your needle with a screwdriver, instead of finger tight. If that continues to..."
teddibear10
teddibear10 posted an answer for this White Sewing W3300 Computerized Sewing Machine:
"IF you have the thread guide and the screw or what ever was used to attach it, you might..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"I'm understanding that the machine will sew in reverse, but not forward? Has it been..."
teddibear10teddibear10 posted an answer for this White Sewing Sewing Machines:
"I suspect that you are trying to change the top tension. The link is a very good..."
teddibear10
teddibear10 posted an answer for this Singer Featherweight 132Q Mechanical Sewing Machine:
"Right here. You will need to be able to download PDF documents. Does anyone have the..."
teddibear10
teddibear10 posted an answer for this Singer 2662:
"I'm not sure what you mean by "reel", but if you are referring to the spool pin which..."
teddibear10teddibear10 posted an answer for this Janome Memorycraft 9700 Computerized Sewing Machine:
"There is an adjustment on the machine itself that controls how fast the machine is able to..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"There should be a control on top of your machine that is directly over the needle OR, if..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"You could probably get away with a generic walking foot. They are available in the fabric..."
teddibear10teddibear10 posted an answer for this Singer Sewing Machines:
"The older machines had the switch directly behind the needle mechanism. Reach behind the..."
teddibear10
teddibear10 posted an answer for this GE Washer Filter Power Line WH12X10330 Corcom 16WGF1 F43338E:
"Is this a new machine? If so, then it may have a sensor that lets it know that you have a..."
teddibear10
teddibear10 posted an answer for this White Sewing Speedylock 1600 Mechanical Sewing Machine:
"Try removing thread #3 from the tension altogether. If this doesn't work, then try using..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"Can you describe problem?"
teddibear10teddibear10 posted an answer for this Sewing Machines:
"Try http://www.manualsonline.com/"
teddibear10teddibear10 posted an answer for this Janome Memory Craft 3000:
"You may have it locked in to bobbin wind mode."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"http://homeappliance.manualsonline.com/manuals/mfg/europro/europro_sewing_machine_product..."
teddibear10teddibear10 posted an answer for this Brother CE8080PRW Limited Edition Project Runway Sewing Machine:
"Are you talking about the flywheel? The knob that turns when you are stitching? If that..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"If the stitch problem is on top, it is a bobbin problem, and if it is on the bottom, then..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"Yes, this controls the upper thread tension. You can try sewing with it (it won't hurt..."
teddibear10teddibear10 posted an answer for this Sewing Machines:
"New Home is one of those machines that has multiple families. I have one that was made by..."
teddibear10
Sewing Machines 34 answers
Vacuums 1 answer
