1
miketodd19 posted an answer for this Printronix Line Matrix P5005B Printer:
"Tighten the ribbon hubs, carefully they can crack"
miketodd19
miketodd19 posted an answer for this IBM 4230 Model 101 Matrix Printer:
"Clean the bars that the print head moves on with solvent then if still stiff lubricate..."
miketodd19
miketodd19 posted an answer for this IBM 4247 Model 003 Matrix Printer:
"Loosen the print head (2 hex screws) push the print head towards the back of printer or..."
miketodd19
miketodd19 posted an answer for this IBM 6400 Matrix Printer:
"Press the view button tear off the paper then press view button again and the printer will..."
miketodd19
miketodd19 posted an answer for this Office Equipment & Supplies:
"The sensor with the wheel is the paper motion sensor, The other one is the paper present..."
miketodd19
miketodd19 posted an answer for this IBM Infoprint 6500 Matrix Printer:
"You hace to save settings in the config menu, sometimes they dont save so its better to..."
miketodd19
miketodd19 posted an answer for this IBM Infoprint 1412 Laser Printer:
"open toner door, press and hold stop button whilst powering on printer. or Telnet into..."
miketodd19
miketodd19 posted an answer for this IBM Network Printer 12 Laser:
"Clean or replace the rollers that pick up paper, they unclick for removal quite easily"
miketodd19
miketodd19 posted an answer for this IBM Infoprint 1532 Laser Printer:
"count the beeps, the number of beeps detemines the error."
miketodd19miketodd19 posted an answer for this IBM Network Printer 12 Laser:
"Either dirty rollers or a dirty sensor"
miketodd19
miketodd19 posted an answer for this IBM Infoprint 1312 Laser Printer:
"open the toner door then press and hold down the stop button, whilst holding this down..."
miketodd19
miketodd19 posted an answer for this IBM 6400-I2S Matrix Printer:
"The software i think is held in the simm mem. there is a function available to copy these..."
miketodd19
miketodd19 posted a question about Tally Serial Matrix T2030 Printer:
"Tally T2030 matrix printer prints 2 copies of everything when only 1 sent? its attached to..."
miketodd19
miketodd19 posted an answer for this IBM 4224 Model 101 Matrix Printer:
"clean the contacts on cards, these printers are old and doing this fixes lots of problems."
miketodd19miketodd19 posted an answer for this IBM Infoprint 6500 Matrix Printer:
"could be hammer phasing"
miketodd19miketodd19 posted an answer for this IBM Infoprint 6500 Matrix Printer:
"try changing the chacters per line, print out a config page and towards the bottom of this..."
miketodd19miketodd19 posted an answer for this IBM Infoprint 6500 Matrix Printer:
"pressing the up and down arrow keys at the same time should unlock printer, take printer..."
miketodd19miketodd19 posted an answer for this IBM 6400 Matrix Printer:
"is there print missing??? if so the hammer fret in that location probably (90%) needs..."
miketodd19miketodd19 posted an answer for this IBM 6400 Matrix Printer:
"try part number 170613-001"
miketodd19miketodd19 posted an answer for this IBM 6400 Matrix Printer:
"the menu where you set the time once you've scrolled though all the time options will give..."
miketodd19miketodd19 posted an answer for this IBM 6400 Matrix Printer:
"the 6400 paper present sensor works off the reflection of the paper itself, so if the..."
miketodd19miketodd19 posted an answer for this IBM 6400 Matrix Printer:
"email me on miketodd1971@hotmail.co.uk, think i got that code"
miketodd19
Office Equipment &... 21 answers
