Saws - Recent Questions, Troubleshooting & Support
Is Woodworking 4 Home reliable?
Yes Woodworking 4 Home is reliable and it is helpful to because you can make the furniture of your own choice just by following the instruction step by step.For more information use this sourcehttp://productreviewandrate.com/woodworking-4-home-worth-it-or-not/
3/12/2026 11:34:57 AM •
Montana...
•
Answered
on Mar 12, 2026
How to install a fence?
Waht fence do you want to install. Is it a boundary fence? I ask because a radial arm saw also comes with a fence. It is always better to give too much info than too little.
2/4/2026 6:07:52 AM •
Saws
•
Answered
on Feb 04, 2026
Ryobi HT26 blade starts and stops
Choosing the best construction company to work for in India can depend on your career goals, but several firms are widely recognized for strong work culture, employee development, project diversity, and industry reputation. One of the most consistently recommended is Larsen & Toubro (L&T). L&T is a leading integrated construction and engineering company known for large-scale infrastructure, industrial, and building projects across India and globally. They invest significantly in employee training, safety practices, and career progression, making them appealing for engineers and project managers. Another top choice is Tata Projects, part of the Tata Group. It's known for professionalism, structured HR policies, and exposure to diverse civil and industrial construction assignments. Tata Projects is appreciated for work-life balance relative to industry norms and opportunities to work with advanced technologies. Shapoorji Pallonji Group is also a respected employer, especially for those interested in heritage and high-end construction projects, combining tradition with modern engineering. https://brickbase.in/
1/18/2026 2:57:58 PM •
Ryobi Saws
•
Answered
on Jan 18, 2026
Element HDTY 32 powers blue; but no picture or sound
- Input/Source Mismatch: TV is on the wrong HDMI, antenna, or app source.
- Cable/Connection Issues: Loose or faulty HDMI/AV cables, or port damage.
- Backlight or Display Failure: Power light works, but LED backlight is out (TV is "on" but screen appears black).
- Audio/Software Glitch: Firmware bug, muted sound, or speaker failure.
- Power Supply Problems: Partial failure in the internal board, causing AV dropout without full shutdown.
- Overheating or Age: Dust buildup or component wear in older units.
Step-by-Step Troubleshooting
- Verify Basic Power and Connections:
- Ensure the TV is plugged into a working outlet (test with another device). The blue light confirms power, but try a different cord if available.
- Check all cables: Unplug/replug HDMI (from cable box, streaming device), antenna, or optical audio. Switch to a different HDMI port (most models have 2-3).
- Press the power button on the remote or TV (hold for 5 seconds) to cycle off/on-wait 30 seconds between.
- Adjust Input Source and Settings:
- Use the remote's "Input" or "Source" button to cycle through options (e.g., HDMI1, TV, USB). If stuck, enter menu (Settings > Input) and select the correct one.
- Check volume: Ensure it's not muted (press Vol+ or check remote batteries). Go to Settings > Audio > Speakers On.
- Shine a flashlight on the screen in a dark room-if you see a faint image, it's a backlight issue (common in Element LEDs; screen works but lights are dead).
- Perform a Soft Reset:
- Unplug the TV from the wall for 5-10 minutes (this discharges capacitors and resets firmware).
- While unplugged, press and hold the power button on the TV for 30 seconds to drain residual power.
- Plug back in and turn on. If it has a factory reset option: Settings > System > Reset (this erases apps/settings-back up if possible).
- Test Hardware and Audio:
- Connect a different device (e.g., DVD player or phone via HDMI) to rule out source problems. If no picture/sound persists, it's the TV.
- For sound: Try external speakers/headphones via headphone jack or Bluetooth (Settings > Audio > Output). If external works, internal speakers may be faulty.
- Inspect vents: Clean dust from back/sides with compressed air (TV off/unplugged) to prevent overheating shutdowns
10/7/2025 10:43:33 AM •
Saws
•
Answered
on Oct 07, 2025
How do adjustable height tables work?
Adjustable height tables, like those offered by RDM Industrial Products, operate using mechanisms that allow users to change the table's height according to their needs. These tables typically feature electric or manual adjustments that enable easy raising or lowering of the tabletop. RDM Industrial Products offers a range of adjustable height tables designed for ergonomic comfort and versatility. For more details, you can explore their offerings at
https://www.rdm-ind.com/
9/23/2025 10:48:12 AM •
Saws
•
Answered
on Sep 23, 2025
M12 band saw doesn't work
First Go for warranty maybe they deliver you a full brand new tool .
Sometimes before buying Milwaukee products look for spare parts delivery before you buy Milwaukee because sometimes its sometimes stopped delivery some of the spare parts in between 2 years by some models build with a powercable if there are fuel bldc motor replacements with a battery coming up in the new roulation of MILWAUKEE 2 hours working and 1 hour rest for almost all fuel models because battery models are not made for long-term load capacity as the machines with cord and plug.
remember that well GOOD LUCK
Do I need a building permit to install a fence
Yes, you may need a permit if your fence is tall, in the front yard, or made of certain materials. For a simple backyard fence under 6 ft, most places do not require one - but always confirm with your local office.
9/11/2025 12:24:05 PM •
Saws
•
Answered
on Sep 11, 2025
How can i set saw to cut dados and is there a video?
A sliding miter/chop saw like your Chicago Electric can cut dados, but only by making repeated shallow passes - you cannot install a dado blade stack (that's for a table saw).
How to Set It Up
1. Mark the dado on your board (width and depth).
2. Adjust depth stop on your saw so the blade only cuts down to the depth you need (not all the way through).
3. Make the first cut along one edge of the dado.
4. Slide the board slightly and keep making passes until the whole groove is cleared.
5. Clean up the bottom with a chisel if needed.
Clamp your work securely - you'll be making several cuts side by side.
Never try to mount a dado blade set on a miter saw; it's unsafe.
Answer: You set your saw by using the depth stop to control cut depth and then make multiple overlapping cuts across your dado area. It works fine for occasional grooves, though a table saw or router is faster.
Would you like me to draw a simple diagram showing how to position the work and blade for the dado passes?
9/11/2025 12:21:52 PM •
Saws
•
Answered
on Sep 11, 2025
Can I buy athe machined aluminum fence for my Chicago Electric 61790 mitre saw
Yes, you can buy a machined aluminum fence / upgrade for a Chicago Electric miter saw - but probably not off the shelf for the 61790 model exactly. You'll likely have to:
1. Adapt a universal/extruded aluminum fence.
2. Possibly get one custom-made locally to fit precisely.
3. Modify mounting holes or brackets to match your saw.
9/11/2025 8:58:39 AM •
Saws
•
Answered
on Sep 11, 2025
Saw keeps cutting out when cutting
Common Causes & Fixes
1. Worn Carbon Brushes
* The most common cause. When brushes wear down, the motor loses contact and cuts out.
* Fix: Inspect and replace the carbon brushes (cheap and fairly easy).
2. Overheating / Thermal Cut-Out
* Many saws have a thermal protector. If you push too hard or cut continuously, it overheats and shuts off.
* Fix: Let the saw cool down, clean vents, and avoid forcing the cut.
3. Loose Power Connection
* A loose power cord, plug, or internal wiring can interrupt power.
* Fix: Check the cord for breaks or kinks, and ensure it's firmly seated.
4. Faulty Trigger Switch
* Worn or dirty contacts in the on/off switch can cause intermittent cutting out.
* Fix: Switch may need cleaning or replacing.
5. Dust Build-Up Inside Motor
* Sawdust can clog vents and interfere with motor brushes or cooling.
* ? Fix: Blow out the motor housing with compressed air.
6. Overloaded Circuit
* If your saw is on a long extension cord or weak breaker, it may trip under load.
* Fix: Plug directly into a good outlet (no thin extension cords).
Quick Checklist
* Unplug saw ? check brushes.
* Clean out dust and check vents.
* Inspect power cord & plug.
* Test on a different outlet.
* If still cutting out ? suspect switch or motor winding issue (may need professional repair).
9/11/2025 8:56:02 AM •
Saws
•
Answered
on Sep 11, 2025
Are bushes easy to on a macallister sliding chop saw
What you can do
1. Contact parts suppliers or metal fabricators locally: Ask if they can make you a machined aluminum fence to your saw's specs (height, thickness, mounting hole pattern).
2. Search after-market or universal fences that can be adapted. Sometimes a universal aluminum miter saw fence (or aluminum angle bar + T-track etc.) can be fitted with minor mods.
3. Check with Harbor Freight / Chicago Electric support: maybe they have a heavy-duty or premium upgrade fence.
9/11/2025 8:51:15 AM •
Saws
•
Answered
on Sep 11, 2025
Stator contactproblems what need modification after few years but
now a few years later ,
1,332 / 5,000
Still despite this, in Germany they do not want to respond to years of the same experiences over and over again, and they continue undisturbed with the production process of motor stators at FESTOOL, where the weak point is the one-time plug-in contacts of the motor electric field of the CS 70 EB cross-cut saw, they do not pay attention to the fact that with daily use of the model cs 70 EB there is a good chance that it will start to give problems just after a year of being out of warranty, and the culprit is hidden, these are the stator wires which after cutting a ty-rap often already show poor connections at the contacts, this problem can preferably be solved earlier to prevent problems with the armature in the short term before the armature problems arise. Remove the motor from the machine and solder all four stator contacts with rosin core solder or flux-coated solder. Blow out the armature thoroughly with an air gun (preferably outside or with a vacuum cleaner next to it). This will release sometimes a black cloud of stored carbon from the commutator circuit, so be mindful of the surrounding environment. Remove the stator from the motor housing so that the mains connection contacts are easily accessible, but the wires to the electronics module remain in place through the housing.
VID_20170223_123427.mp4
Not finding what you are looking for?
