Lands Phones - Recent Questions, Troubleshooting & Support

0helpful
1answer

The outgoing message on my TMC phone system does not have a beep after the outgoing message

On many TMC phone systems, the beep is played automatically after the outgoing message. If it's missing, check that the greeting was recorded correctly and that voicemail is set to Answer & Record rather than Announcement Only. If the settings look correct, try re-recording the greeting or rebooting the system. Knowing the exact TMC model would help narrow it down.
8/9/2026 11:23:41 AM • TMC Lands Phones • Answered on Aug 09, 2026
0helpful
2answers

Why does my vtech phone model cs6829-2 always disconnect all calls after 29-31 minutes?

If your VTech CS6829-2 phone disconnects calls after about 30 minutes, it may be caused by a phone line provider timeout, interference, weak signal between the handset and base, or a faulty base/handset. Try moving the handset closer to the base, replacing batteries, resetting the phone, and checking with your phone service provider if the issue continues.
7/23/2026 3:28:25 AM • Vtech Lands... • Answered on Jul 23, 2026
0helpful
1answer

Can I add another uniden hand set to a uniden D1680 series

The Uniden D-1680 system can have up to 12 handsets registered to the base. (The phone system was sold in bundles with 0 to 11 accessory handsets.) However, this cordless phone system has been discontinued. I can only find used DCX160 handsets (the compatible accessory handset) on Amazon and E-bay. I hope this helps. Cindy Wells
7/2/2026 11:01:37 PM • Uniden Lands... • Answered on Jul 02, 2026
0helpful
2answers

E1 displays on base unit uniden wdect 3355

THATS AN ERROR MESSAGE, BASE IS NOT GOING TO WORK ITS SHOT.
6/17/2026 12:50:05 AM • Uniden 2.4 GHz... • Answered on Jun 17, 2026
0helpful
3answers

E1 error on Dect 6 answering machine

I have reviewed the User Instructions for your model and there is no mention of error codes, such as E1. I did find a contact number for customer assistance, so I think you need to give them a call:1-800-448-0329Be sure to have your model number information handy when you call. Good luck!
6/17/2026 12:33:28 AM • Uniden DECT 6.0... • Answered on Jun 17, 2026
0helpful
4answers

How long does it take to get an answer?

Here are seven interview tips for snagging that second-round spot. 1. Have answers prepared for the three most common interview questions. They're not all going to be this easy.There are certain questions that every interviewer will ask in one form or another, so you have to be ready to answer them regardless of which field you're trying to enter. The good news is, if you're a great candidate for the job, coming up with an answer that will impress your interviewer should be easy. These questions are:
  • Why are you interested in this role?
  • What are your strengths?
  • Why do you want to work at this company in particular?
You should always answer "Why do you want this role?" with the following two points:
  1. Talk about why you'll be a great fit for the position.
  2. Explain what you think you can get out of the position in the long-term.
This way you're showing that not only do you have something to offer the company but also that the company has something to offer you (which makes you an even better investment on their part). Most employers want to know that the person they're hiring is looking for a productive relationship-not just a way to make money. As for strengths, be sure to pick your top three strengths most relevant to the position and have concrete examples of when you displayed them in the past-even if that means bringing an example from class or an extracurricular rather than a past job or internship. And be honest here-misrepresenting yourself will only hurt your chances of giving a quality example. The last question will rely heavily on your research around the company's mission, culture, and how those relate to your personal goals. For example, you could say something like, "Because I want to be in leadership in the long-run, I think your company, which offers a ton of management training, would be a great fit for me." 2. Show them that you've done your research. Just be sure to do it before the interview.There are three things you really need to learn about before your interview:
  1. Learn about the company's business and history. You should know what the business does (obviously) and how it started. Make note of things like acquisitions, major turning points, and the biggest wins (and losses) in its history. This kind of information can come in handy and-more important-is not something you want to be caught off-guard without.
  2. Learn about your potential role. Understanding the business means understanding what you would add to the business. Thoroughly read the job description. After that, search the name of the role plus the name of the company to get more example-based definitions of the position. This will greatly inform your answers in regards to strengths, fit, and what you hope to gain.
  3. Check the news. When's the last time the company made the news? You probably won't want to bring up any scandals or PR disasters. But showing them that you not only keep abreast of current affairs but also have an eye on the company is a great opportunity to shine.
How are you going to show them you've done the work? Let the research inform your answers. It's okay to be explicit and say, "For example, in my research, I learned..." They don't expect you to be a lifelong expert on the company, just someone who can do their homework when they're called upon. 3. Show enthusiasm and gratitude throughout the interview. Let 'em know that you care!Already by applying, you've shown some interest in the position. However, to prove to the interviewer that this isn't "just another job" to you, make sure to sound engaged, enthusiastic, and grateful for the interviewer's time and consideration. This is especially important over the phone, where your interviewer's only impression of your attitude is the sound of your voice. Even if you're nervous, you should answer the phone with a cheery, "Hi, this is ____." rather than just a "Hey!" or "Hello." Listen closely to what the interviewer says, thank them for their time, and be sure you're showing your excitement with passionate answers. Don't worry too much about being cheesy-it's certainly better than the opposite! 4. For phone interviews, make sure you're in a quiet place with a strong signal. Believe us, it never sounds as charming in an interview.Find yourself a room in the library, your home, or a school building that will give you the privacy and resources you need to successfully complete the interview. You want to avoid taking any calls outside, in coffee shops, other public places, or anywhere where you might be asked to move in the middle of your interview. This means you should carefully plan ahead. Ask your roommate to clear out for that window of time, book a room in the library in advance, or tell your family that you'll be in y room taking a call at x o'clock. You'll also want to have your laptop ready (with internet access) to take quick notes, reference any documents they might want to send you, or open any links they might pass along. Sometimes you'll even be asked to complete a quiz or exercise during the call, so make sure you're ready for anything. 5. Have a notepad and printed version of your resume in front of you. Jot down quick talking points you want to hit later... but always look attentive, like so.This is especially important if they've sent you documents to look at on the computer or have asked you to follow a link. You can't always use your computer to take notes and you don't want to miss something important. Plus, if your first-round interview IS in person, then using a computer to take notes is out of the question (unless they instruct you to). 6. For video calls, dress professionally and work in a clean setting. Just make sure you have somewhere to sit up straight...When you're on a video call, there's a limited visual element that you have to be aware of. Make sure the room you're in is clean and nothing too distracting is in the image. You should also dress like you would for an in-person interview. Take down any distracting or controversial posters/wall art and make sure your internet connection is strong enough to properly conduct a video call. You might need to work off a school computer or Wi-Fi network to make this happen-so, once again, plan ahead. 7. Don't forget to follow up. I just wanted to say, "Thanks... and here are three reasons why I'm perfect for the job, partner!"First round interviews usually mean many candidates being screened for the same position. Following up with a well-worded, prompt email briefly reminding the interviewers of your skills, why you would be a great fit, and your interest in the position will help you stand out. Also, be sure to thank them again for their time and tell them you're looking forward to further discussing the opportunity. By following these steps, you're on the road to landing your dream job. Remember that even if you don't get this particular position, you'll just be better prepared for the next interview. Getting through an interview is in and of itself an accomplishment.
5/28/2026 12:48:18 PM • Lands Phones • Answered on May 28, 2026
0helpful
1answer

Answering machine GE +2-9815

line from wall to machine the machine to phone
5/20/2026 6:56:01 PM • GE Lands Phones • Answered on May 20, 2026
0helpful
1answer

No matter what I do my Panasonic cordless stays on mute. It is a KX-TGD532

If your Panasonic KX-TGD532 always shows "MUTE" and you cannot get rid of it, the problem is usually one of these: The mute soft-key is stuck The handset software froze The TALK button is failing The phone line/modem connection has a problem (sometimes it falsely looks like mute) ? JustAnswer +1 Try these fixes in order: Press the soft key directly under "MUTE" On this model, mute is toggled using the screen soft-key during a call. ? Best Buy +1 Power reset everything Unplug the base power Remove batteries from all handsets Unplug the phone line from the base Wait 5 minutes Reconnect phone line ? power ? batteries Replace the rechargeable AAA batteries Weak batteries can cause strange handset behavior on Panasonic cordless phones. ? Best Buy +1 Test the phone line Plug a different phone into the same wall jack/modem port. If that phone also has no dial tone, the issue is your phone service or modem, not the Panasonic. ? JustAnswer +1 Check if the mute button is physically stuck The mute function is tied to the left soft-key near TALK on this series. Dirt or a sticky button can keep it engaged. ? Best Buy +1 Factory reset the handset MENU ? #136 ? YES You may need to re-register the handset afterward. If the handset still stays muted after a full reset and fresh batteries, the handset keypad board is probably failing.
5/7/2026 1:57:45 AM • Panasonic Lands... • Answered on May 07, 2026
0helpful
1answer

My phone keeps clicking and going on and off KX TGA641

The model Panasonic KX-TGA641 is a cordless handset, and the symptoms you describe - clicking, turning on/off, or restarting - are usually caused by one of these issues: Weak or failing rechargeable batteries Dirty battery contacts Bad charging connection/base issue Power interference or failing handset electronics Try these steps: Remove the batteries from the handset. Clean the battery contacts inside the phone and on the batteries. Reinstall or replace the batteries. The KX-TGA641 normally uses AAA Ni-MH rechargeable batteries. Leave it on the charger for several hours. Unplug the main base unit power for 1 minute, then reconnect it. Check whether the clicking happens only near the base or everywhere. If the screen flickers and the phone repeatedly powers on/off even with fresh batteries, the handset itself may be failing internally. You can also try resetting the handset: MENU ? #136 ? select "Yes" (if the handset stays on long enough). If you want, I can also help you find: the user manual PDF, compatible replacement batteries, or a replacement handset that works with your base.
5/7/2026 1:56:43 AM • Panasonic KX... • Answered on May 07, 2026
0helpful
1answer

How to unblock a number on vtech cordless phone

To unblock a number on a VTech cordless phone, you'll need to access the call block or blacklist settings on the base unit or handset menu. Most VTech models let you manage blocked numbers through the Menu ? Call Block option. Scroll through the blocked number list, highlight the number you want to remove, and select Delete or Unblock to allow calls from that number again. If your phone doesn't show a "Call Block" option, check the User Guide for your specific model, as some require pressing the Block button and then navigating to the settings to manage the list. Always make sure your handset is properly connected to the base and in range while making changes. For detailed steps, menu navigation, and screen examples, this VTech cordless phone user reference is a helpful guide: VTech cordless phone setup and block list manual Once you remove the number from the blocked list, it should be able to ring through normally.
12/25/2025 5:44:53 AM • Vtech Lands... • Answered on Dec 25, 2025
6helpful
2answers

I need to reset my

Reset it to what? What system is it connected to?
11/16/2025 11:34:38 AM • Panasonic... • Answered on Nov 16, 2025
0helpful
1answer

Advanced American EL52303 Telephone. how to set the time and date please?

Question edited for clarity, add magic word.Question moved from Misc to maker category.Page 16 of the Owner Manual refers.https://att.vtp-media.com/media/p/document2/products/%7B60E073C4-7031-4BBF-BA14-B27ECD0E964B%7D/EL52503_UM_3.pdf..
9/11/2025 12:50:59 PM • Advanced... • Answered on Sep 11, 2025
0helpful
1answer

Marketer calling our phone and our number shows up as the caller on the Caller ID Screen.

Joe get the top APP on your phone called call blocking your phone service provider has it for free t-mobile is called example one, call yours not mine https://www.t-mobile.com/support/plans-features/block-unwanted-calls uses the blocker apps. they spoof the Caller ID, (evil) so block it.
9/11/2025 12:49:01 PM • Lands Phones • Answered on Sep 11, 2025
0helpful
2answers

Need an installation and setup guide for tmc soho m4810.

you have to assign an ext to the phone.Press Program and extension button to assign it to an extension.
all phones have to have different assigned ext (obviously)...

To cancel stored extension(to change) Press program, press PAGE twice, press mute.


I need the users guide!!! have quite a few install and set up guides - I just need the users guide!!! need to change time and other things!!!

Please help...will trade...
9/11/2025 12:47:31 PM • TMC M4810... • Answered on Sep 11, 2025
0helpful
1answer

How do I set the time on my Binatone Amour 5025S Single?

1.Press and hold the "Clock" or "Set" button until the hour digits begin to flash. 2. Use the arrow or number keys to set the correct hour. 3. Press the "Clock" or "Set" button again to move to the minutes. 4. Adjust the minutes the same way. 5. Press the button again to confirm and exit the setting mode.
8/13/2025 11:12:14 AM • Binatone Lands... • Answered on Aug 13, 2025
0helpful
3answers

Hi everyone, i have a problem with aria SOHO, when there is an incoming call from outside, the phone does not ring and I cannot hear the call - the problem is just with outside calls.

It sounds like there might be an issue with your Aria SOHO phone system's incoming call settings or configuration. Here are some steps you can try to troubleshoot the issue:
  1. Check the volume settings: Make sure that the volume on your Aria SOHO phone system is turned up and not set to mute. You can do this by pressing the volume up button on the phone or checking the volume settings in the phone's menu.
  2. Check the ringer settings: Make sure that the ringer is enabled for incoming calls. You can check this by accessing the phone's menu and looking for the ringer settings option. Make sure it is set to "On" or "Enabled."
  3. Check the incoming call settings: Check the incoming call settings on your Aria SOHO phone system to ensure that calls from outside are set to ring through to your phone. This can usually be done by accessing the phone's menu and navigating to the call settings or call routing options.
  4. Check the cables and connections: Make sure that all cables and connections between your Aria SOHO phone system and the outside phone line are secure and properly connected.
  5. Restart the phone system: Try restarting your Aria SOHO phone system by unplugging it from the power source and plugging it back in after a few seconds. This can sometimes help reset the system and resolve any software or configuration issues.
If none of these steps work, you may need to contact a professional technician who is familiar with the Aria SOHO phone system to help diagnose and fix the issue.
6/9/2025 9:14:18 AM • Aria Lands... • Answered on Jun 09, 2025
0helpful
1answer

BEETEL TELEPHONE JASPER F28 0007

24C32 memory fail.
5/20/2025 12:15:56 PM • Lands Phones • Answered on May 20, 2025
0helpful
1answer

I have a Binatone Vesta 1305 Home Phone. I can make calls but cannot receive them?

Old Question!!Question edited for clarity.Question moved from GPS Sat Nav.Ideas here. Blocked your own number?https://www.google.com/search?q=Binatone+Vesta+1305+I+can+make+calls+but+cannot+receive+them..
5/9/2025 7:16:16 PM • Binatone Lands... • Answered on May 09, 2025
0helpful
2answers

Need instructions for magicbox phone set model monde tam can i download one online??

i need a user manual
4/22/2025 4:59:50 PM • Lands Phones • Answered on Apr 22, 2025
0helpful
2answers

V-Tech DECT 6 DLP72212 Landline Phone. How to unblock a number on model DLP72212 please.

Question edited for clarity add maker.

Question moved from Misc category to maker. Duplicate question deleted, just refresh page. Page 84 and 85 of the manual.

Complete user's manual - DLP72212/DLP72222

vtp-media.com https://cdn-media-att.vtp-media.com > DLP PDF Before downloading the cell phone phonebook, make sure the cell phone is paired, active, and connected to your DLP72212/DLP72222/DLP72312/. DLP72412/BL3103/ ... 157 pages ..
4/21/2025 6:08:45 PM • Vtech V-Tech 2.4... • Answered on Apr 21, 2025
Not finding what you are looking for?
Lands Phones Logo

81,034 questions posted

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73787 Answers

Cindy Wells

Level 3 Expert

6751 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42234 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...