Dirt Devil Tools & Hardware - Others - Recent Questions, Troubleshooting & Support

0helpful
1answer

Why wont my dirt devil gator 18v charge?

Hello! If you are experiencing a short run time your battery may need to be reset. Try completely depleting the battery. Run the vacuum until it shuts off. Then re-charge for a full 24 hours. The indicator light will come on to indicate the unit is charging. If there is no indicator light on the charger, the charger may need to be replaced. Below is a link where you may go to purchase the charger if needed. Hope this helps! Charger Innsbruck 1100Mah 1300Mah Cec 2013 Compliant
10/23/2014 7:29:36 PM • Dirt Devil Dd... • Answered on Oct 23, 2014
0helpful
1answer

Ryobi table router, slows down and stops working. You can still hear the motor running

a few common problems:
  1. Worn Brushes - The motor brushes may be worn out, causing inconsistent power delivery. Replacing them could help.
  2. Overheating - If the router is overheating, it may shut down temporarily. Check for dust buildup around the motor vents and clean them.
  3. Faulty Switch or Wiring - A loose connection or failing switch could cause intermittent power issues.
  4. Bearing Issues - If the bearings are worn or clogged with debris, they may cause the motor to slow down.
  5. Electronic Speed Control Malfunction - Some routers have electronic speed controls that can fail, leading to erratic behavior.
https://www.routerforums.com/threads/ryobi-router-troubleshooting-has-it-bitten-the-dust.49890/
5/11/2025 6:00:53 PM • Tools & Hardware... • Answered on May 11, 2025
0helpful
1answer

Mi pregunta es sobre unos anclajes para parapetos de un edificio para operar un andamio colgante. Quiero saber si se instalaron correctamente o deben sobre salir mas de la pared.

Question edited to add English translation.Question moved from Misc category.English only on Fixya please. We are a North American site.https://translate.google.ca/?sl=auto&tl=en&op=translateNo one will answer that question here. It is too DANGEROUS a question to answer without testing and seeing in person.Scaffolds should have a gantry that swings out from the roof. Rope Access Technicians (my son is one) use Eyelet Anchors with a rope and a board, one rope on the board, one rope on the operator, two or three anchors.Not sure where you live, but every city has a Building Safety Officer / Inspector. They will view for free and give you an opinion.https://www.google.com/search?q=parapet+anchors+s+to+operate+a+suspended+scaffold..
5/8/2025 11:39:30 PM • Tools & Hardware... • Answered on May 08, 2025
0helpful
1answer

Manual for craftright staple gun

how do you fit the brad nails
12/3/2024 4:49:19 AM • Tools & Hardware... • Answered on Dec 03, 2024
0helpful
1answer

I have a Chamberlain Waxmaster RA7000 and the the pad/pad holder assembly has disintegrated while in storage. I'm looking to replace it but am struggling in finding one. The part number is 41P27020.

Question moved from Misc category to Polishers. There doesn't appear to be any parts available. My advice would be to make you own. Get some High Density Foam from Amazon, cut to size and glue it down with Contact Adhesive. https://www.google.com/search?q=Chamberlain+waxmaster+Model+RA7000+Parts ..
10/26/2024 3:44:38 AM • Tools & Hardware... • Answered on Oct 26, 2024
0helpful
2answers

Primo tacker manual

Request from manufacturer or Google.
9/25/2024 3:29:54 AM • Tools & Hardware... • Answered on Sep 25, 2024
0helpful
1answer

Can you use ultra white paint as a primer on a wall before painting it?

Not recommended, especially if the ultra white paint is anything but "flat." Primer is designed specifically to adhere to other paints. Look into KILZ primer (if it is available where you are), as I have found it to provide excellent coverage for color changes.
8/23/2024 12:57:00 PM • Tools & Hardware... • Answered on Aug 23, 2024
0helpful
1answer

When aplying fresh paint with roller paint is peeling back of with roller

what is the substrate? (plaster, drywall, painted surface.... etc.) if the surface is painted: can you tell the generic type of paint used before? and what is the condition of the existing paint, is it chalky? did you try to sand it? if so, you might need to sand it and remove all flaking and chalking paint prior to application of a new coat. you might also need a compatible primer for best results.
8/23/2024 12:43:44 PM • Tools & Hardware... • Answered on Aug 23, 2024
0helpful
1answer

I just painted the basement steps with Valspar gloss paint. Now I want to cover the riser with border paper. Do I have to prep the newly painted wood?

bad move steps covered with gloss paint are very slippery so you have introduced a slip hazaed into the house repaint with a non slip paint or paint again a sprinkle fine san in the wet paint to introduce grip No --- newly painted wood is already sealed
8/23/2024 12:10:40 PM • Tools & Hardware... • Answered on Aug 23, 2024
0helpful
1answer

Instruction manual for blue hawk rotary tool set, 200 piece set

  1. sold at Lowes no less, ask them
  2. or ask the maker.?
  3. or google endlessly
well it is just rotor tool, (clones of Dremel tools) so an book or video covers that usage. endless https://duckduckgo.com/?q=rotary+tool+uses&atb=v403-1&iax=videos&ia=videos
6/5/2024 12:19:54 PM • Tools & Hardware... • Answered on Jun 05, 2024
0helpful
1answer

Maximum Router model 54-6810-8. Plunge base locked-will not plunge?

you can take to troubleshoot the issue: Check the Lock Lever: Ensure that the lock lever is fully loosened. If it's tightened, the plunge base won't move freely. Loosen it completely. Stability: Tighten the locking arm for stability. This ensures that the router remains secure during operation. Motor Pack Removal: If the plunge base is still stuck, unplug the router and remove the motor pack from the plunge base. Follow these steps: Unplug the router. Loosen the lock lever. Tighten the locking arm for stability. Carefully remove the motor pack from the plunge base. Remember to follow safety guidelines while troubleshooting and handling the router. If you encounter any issues or have further questions, feel free to call the toll-free helpline for the device at 1-888-670-6682
4/30/2024 10:50:32 AM • Tools & Hardware... • Answered on Apr 30, 2024
0helpful
1answer

Im wanting to paint my out of house like the trim but i have car paint that i mixed half house paint and half car paint will that matter

Yes, it matters while this is not suitable to go with. Because it will not mix perfectly that you can go for either your house or your car. im-wanting-paint-out-house-like-trim-but-i0bi5i5c5y5upqwvylbf2zfm-1-0.jpg Oil Color Paint: Da Vinci Artists Oil Color Paint Display
4/26/2024 4:48:17 AM • Tools & Hardware... • Answered on Apr 26, 2024
0helpful
1answer

I have an Inca 343.190 planer / thicknesser with a problem: the in-feed and out-feed tables are not parallel, but I can't find any advice on how to adjust these tables. Can anyone help please?

The best resources to answer this would be the maker themselves, or the woodworking / machine forums. Details in the link. https://www.google.com/search?q=inca+343.190+manual

Automatic Planer jointers thicknesser 343.190 - Inca Parts ...

Incamachines https://incamachines.com > english > inca-spare-parts > a... 343.190 planer thicknesser plane jointers US models 510, 550, 570.

INCA Woodworking Jointer Planer

Machine Atlas https://docs.machineatlas.com > Inca+Woodworki... PDF The INCA Woodworking. Machinery Handbook. With useful tips and jigs for everyone. Mark Duginske, Karl Eichhorn. ????. Edited by INCA Ltd, Teufenthal/Switzerland . ..
4/19/2024 7:07:51 PM • Tools & Hardware... • Answered on Apr 19, 2024
0helpful
1answer

How much should good scaffold brick guards cost me?

These should be expensive, but they are nothing of the sort. You can pick up quality scaffold brick guards online for as little as £3.99. I use a company called BrikGard because they use 100% recycled plastic scaffold brick guards. I like to be as environmentally friendly as possible without compromising quality or increasing the purchase cost too much. Given that their brick guards are so cheap and made from 100% recycled plastic, I feel safe using them. Also, anyone working on-site should consider using a brick guard because it offers that extra layer of peace of mind so you can get focused on the job without worrying about things like falling debris coming down and striking you. For affordable scaffold brick guards, I would check out BrikGard.
3/18/2024 5:15:05 AM • Tools & Hardware... • Answered on Mar 18, 2024
0helpful
1answer

Vibrapower Disc model BW-5040 exercise machine. E4 flashing on a Vibrapower disc model 5040. Replaced power cable

Question edited for clarity and typos. Question moved from Office Equipment category. It appears to be an unknown machine with no support and only mentions of people selling them. https://www.google.com/search?q=vibrapower+disc+5040+E4+error https://www.google.com/search?q=vibrapower+disc+BE-5040 A manual will often lead the the maker. https://www.google.com/search?q=vibrapower+BE-5040+manual ..
2/2/2024 1:34:19 AM • Tools & Hardware... • Answered on Feb 02, 2024
Not finding what you are looking for?
Dirt Devil Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Dirt Devil Tools & Hardware - Others Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73781 Answers

john h

Level 3 Expert

29497 Answers

Brad Brown

Level 3 Expert

19190 Answers

Are you a Dirt Devil Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...